LoRa_APRS_iGate.cpp 102 : You have to change your settings in 'data/is-cfg.json' and upload it via "Upload File System image"! about lora_aprs_igate

[antonjan]

I found the problem.
I had to add the following in the platformio.ini
upload_port = /dev/ttyUSB* in the ini file and then it uploaded the is-cfg.json config file

[peterus]

Hi Anton!
looks like platformio could not found the correct port in your case to upload the firmware and/or the configuration/file system.
thank you for sharing your fix!
73 Peter, OE5BPA

[gilrpinheiro]

I am having the same issue! The firmware is being loaded in my TTGO-T-Beam board, but its OLED display show the error message: You have to change your settings in "data/is-cfg.json" and upload via "UploadFile System Image"!

[OH2LAK]

Have you followed the instructions and uploaded the settings file to the board? This is a separate task to be done after the board is being flashed 73, Erik OH2LAK

…

On Thu 27. Jan 2022 at 16.26, gilrpinheiro ***@***.***> wrote: I am having the same issue! The firmware is being loaded in my TTGO-T-Beam board, but its OLED display show the error message: You have to change your settings in "data/is-cfg.json" and upload via "UploadFile System Image"! — Reply to this email directly, view it on GitHub <#93 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACEJADQJ5CTLPMGKURZWIYLUYFIYNANCNFSM46AB6XAQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>