Comments (51)
/var/etc/v2ray/v2ray.main.json
这个文件是根据 LuCI 配置自动生成的,手动修改无效。
from luci-app-v2ray.
使用版本:
luci-app-v2ray_1.3.1-1_all.ipk
luci-i18n-v2ray-zh-cn_1.3.1-1_all.ipk
手机上是可以正常使用的
主界面如图
保存配置文件到/var/etc/v2ray/v2ray.main.json 如上文issue描述,我更新了描述中的配置文件
error log如下
2019/10/29 06:59:11 [Warning] [4228259403] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp: lookup myv2ray.domain.name on 127.0.0.1:53: read udp 127.0.0.1:58664->127.0.0.1:53: i/o timeout dial tcp: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed
2019/10/29 06:59:11 [Warning] [1753217400] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed
from luci-app-v2ray.
@kuoruan 能帮看下吗?
from luci-app-v2ray.
你等一下,我发个版,你再试试
from luci-app-v2ray.
好的
from luci-app-v2ray.
v1.3.2-1
from luci-app-v2ray.
我试试看
from luci-app-v2ray.
nslookup 解析不了
报错信息
2019/10/29 09:01:58 [Warning] [2646383610] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed
from luci-app-v2ray.
配置文件贴一下
from luci-app-v2ray.
{
"log": {
"loglevel": "warning",
"access": "\/var\/log\/v2ray-access.log",
"error": "\/var\/log\/v2ray-error.log"
},
"inbounds": [
{
"listen": "0.0.0.0",
"port": 8080,
"protocol": "socks",
"tag": "socks",
"sniffing": {
"enabled": true,
"destOverride": [
"http",
"tls"
]
},
"settings": {
"udp": true,
"auth": "noauth",
"ip": "127.0.0.1"
}
},
{
"listen": "0.0.0.0",
"port": 1060,
"protocol": "dokodemo-door",
"tag": "transparent_proxy",
"sniffing": {
"enabled": true,
"destOverride": [
"http",
"tls"
]
},
"settings": {
"network": "tcp",
"timeout": 300,
"followRedirect": true
}
}
],
"outbounds": [
{
"sendThrough": "0.0.0.0",
"protocol": "vmess",
"tag": "myv2ray.domain.name",
"settings": {
"vnext": [
{
"port": 443,
"users": [
{
"id": "my-id-here",
"level": 1,
"alterId": 64
}
],
"address": "myv2ray.domain.name"
}
]
},
"streamSettings": {
"sockopt": {
"mark": 255
}
}
},
{
"sendThrough": "0.0.0.0",
"protocol": "freedom",
"tag": "direct",
"streamSettings": {
"sockopt": {
"mark": 255
}
}
},
{
"sendThrough": "0.0.0.0",
"protocol": "dns",
"tag": "dns_out",
"streamSettings": {
"sockopt": {
"mark": 255
}
}
}
]
}
from luci-app-v2ray.
resolveip -t 5 myv2ray.domain.name
这个我试了一下也能解析
from luci-app-v2ray.
also see this error message
2019/10/29 09:03:27 [Warning] [1868192558] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp: lookup myv2ray.domain.name on 127.0.0.1:53: read udp 127.0.0.1:45775->127.0.0.1:53: i/o timeout dial tcp: operation was canceled
from luci-app-v2ray.
把 dns 代理勾上呢?
from luci-app-v2ray.
还有就是看看时间有没有同步
from luci-app-v2ray.
dns代理勾上还是dns 解析不了
2019/10/29 09:36:57 [Warning] [3957447484] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed
from luci-app-v2ray.
- 看看时间;
- 关闭透明代理,试试 socks5 代理能不能用。
from luci-app-v2ray.
时间和哪个比较 路由器上是**时间,为啥log显示的看起来像UTC +0的时间
from luci-app-v2ray.
只用socks5也用不了
from luci-app-v2ray.
iptables -t nat -nL
没看到添加的iptables 规则
from luci-app-v2ray.
不知道你为什么把 level 设置为 1?
实在不行的话,找官方吧
关闭透明代理肯定就没有规则了。
from luci-app-v2ray.
@kuoruan 麻烦再帮看下,你能贴个你的配置吗
from luci-app-v2ray.
把 level 删了行吗?
from luci-app-v2ray.
我试试, level 1也是服务端安装的生成的
from luci-app-v2ray.
还是不行
from luci-app-v2ray.
电脑客户端先试试吧,或者看看服务端的配置文件
from luci-app-v2ray.
电脑,手机上都可以用,都用了好久了
from luci-app-v2ray.
电脑上的配置文件导出来和路由器上的比较一下,看看有哪里不同
from luci-app-v2ray.
这配置文件项目比较多,必须要一点一点对
from luci-app-v2ray.
对了,我v2ray服务端是 websocket + tls
电脑导出的配置如下,大部分配置都类似吧,只有outbounds 的streamSettings不一样,是不是这个地方影响的,目前这个UI没有配置streamSettings的地方
{
"dns" : {
"servers" : [
"localhost"
]
},
"inbounds" : [
{
"listen" : "127.0.0.1",
"port" : 1080,
"protocol" : "socks",
"tag" : "socksinbound",
"settings" : {
"auth" : "noauth",
"udp" : true,
"ip" : "127.0.0.1"
}
},
{
"listen" : "127.0.0.1",
"port" : 8001,
"protocol" : "http",
"tag" : "httpinbound",
"settings" : {
"timeout" : 0
}
}
],
"outbounds" : [
{
"sendThrough" : "0.0.0.0",
"mux" : {
"enabled" : false,
"concurrency" : 8
},
"protocol" : "vmess",
"settings" : {
"vnext" : [
{
"address" : "myv2ray.domain.name",
"users" : [
{
"id" : "my-id-here",
"alterId" : 64,
"security" : "auto",
"level" : 0
}
],
"port" : 443
}
]
},
"tag" : "myv2ray.domain.name",
"streamSettings" : {
"wsSettings" : {
"path" : "\/",
"headers" : {
"Host" : "myv2ray.domain.name"
}
},
"quicSettings" : {
"key" : "",
"security" : "none",
"header" : {
"type" : "none"
}
},
"tlsSettings" : {
"allowInsecure" : false,
"alpn" : [
"http\/1.1"
],
"serverName" : "myv2ray.domain.name",
"allowInsecureCiphers" : false
},
"httpSettings" : {
"path" : ""
},
"kcpSettings" : {
"header" : {
"type" : "none"
},
"mtu" : 1350,
"congestion" : false,
"tti" : 20,
"uplinkCapacity" : 5,
"writeBufferSize" : 1,
"readBufferSize" : 1,
"downlinkCapacity" : 20
},
"tcpSettings" : {
"header" : {
"type" : "none"
}
},
"security" : "tls",
"network" : "ws"
}
}
],
"routing" : {
"name" : "all_to_main",
"domainStrategy" : "AsIs",
"rules" : [
{
"type" : "field",
"outboundTag" : "myv2ray.domain.name",
"port" : "0-65535"
}
]
}
}
from luci-app-v2ray.
尝试了一下,用类似电脑上的配置,在路由器里面选择使用自定义配置,
看到一些错误信息如下
2019/10/29 15:44:39 [Warning] [3076464785] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp VPS-IP-HERE:443: operation was canceled dial tcp: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed
from luci-app-v2ray.
。。。。
下面那个框就可以填 streamSettings
from luci-app-v2ray.
保存之后没有保存到
/var/etc/v2ray/v2ray.main.json 下面这个部分还是没变
"streamSettings": {
"sockopt": {
"mark": 255
}
}
from luci-app-v2ray.
保存并应用,或者重载服务 OK?
from luci-app-v2ray.
首届面忘记勾上了
from luci-app-v2ray.
可以了,谢谢 @kuoruan
from luci-app-v2ray.
socks5可以了,我再试试透明代理
from luci-app-v2ray.
"alterId"
和服务器一致,透明代理可以使用了
谢谢 @kuoruan
from luci-app-v2ray.
@kuoruan 发现一个问题,服务刚启动的时候,cn域名,国外域名都能访问,过一会全都访问不了了
看了iptables 规则 之前正常使用的ss 在Chain PREROUTING是插入在最前面的,而我们这里是插入在Chain PREROUTING的最后面
from luci-app-v2ray.
看看是不是 #35
from luci-app-v2ray.
试了一下,还是同样的问题,访问不出去,iptables 规则有问题
from luci-app-v2ray.
遇到问题请附上详细信息,我猜也猜不出来啊,比如向上面的 issue 里给详细的 iptables 对比!!!
from luci-app-v2ray.
ss 的iptables
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
SS_SPEC_LAN_DG tcp -- 0.0.0.0/0 0.0.0.0/0
prerouting_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom prerouting rule chain */
zone_lan_prerouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_prerouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_prerouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
SS_SPEC_WAN_DG tcp -- 0.0.0.0/0 0.0.0.0/0
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
postrouting_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom postrouting rule chain */
zone_lan_postrouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_postrouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_postrouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
Chain SS_SPEC_LAN_AC (1 references)
target prot opt source destination
RETURN all -- 0.0.0.0/0 0.0.0.0/0 match-set ss_spec_src_bp src
SS_SPEC_WAN_FW all -- 0.0.0.0/0 0.0.0.0/0 match-set ss_spec_src_fw src
SS_SPEC_WAN_AC all -- 0.0.0.0/0 0.0.0.0/0 match-set ss_spec_src_ac src
SS_SPEC_WAN_AC all -- 0.0.0.0/0 0.0.0.0/0
Chain SS_SPEC_LAN_DG (1 references)
target prot opt source destination
RETURN all -- 0.0.0.0/0 0.0.0.0/0 match-set ss_spec_dst_sp dst
SS_SPEC_LAN_AC tcp -- 0.0.0.0/0 0.0.0.0/0
Chain SS_SPEC_WAN_AC (3 references)
target prot opt source destination
SS_SPEC_WAN_FW all -- 0.0.0.0/0 0.0.0.0/0 match-set ss_spec_dst_fw dst
RETURN all -- 0.0.0.0/0 0.0.0.0/0 match-set ss_spec_dst_bp dst
SS_SPEC_WAN_FW all -- 0.0.0.0/0 0.0.0.0/0
Chain SS_SPEC_WAN_DG (1 references)
target prot opt source destination
RETURN all -- 0.0.0.0/0 0.0.0.0/0 match-set ss_spec_dst_sp dst
SS_SPEC_WAN_AC tcp -- 0.0.0.0/0 0.0.0.0/0
Chain SS_SPEC_WAN_FW (3 references)
target prot opt source destination
REDIRECT tcp -- 0.0.0.0/0 0.0.0.0/0 redir ports 1080
Chain postrouting_lan_rule (1 references)
target prot opt source destination
Chain postrouting_rule (1 references)
target prot opt source destination
Chain postrouting_wan_rule (1 references)
target prot opt source destination
Chain prerouting_lan_rule (1 references)
target prot opt source destination
Chain prerouting_rule (1 references)
target prot opt source destination
Chain prerouting_wan_rule (1 references)
target prot opt source destination
Chain zone_lan_postrouting (1 references)
target prot opt source destination
postrouting_lan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom lan postrouting rule chain */
SNAT tcp -- 192.168.1.0/24 192.168.1.1 tcp dpt:80 /* !fw3: home (reflection) */ to:192.168.1.1
SNAT udp -- 192.168.1.0/24 192.168.1.1 udp dpt:80 /* !fw3: home (reflection) */ to:192.168.1.1
SNAT tcp -- 192.168.1.0/24 192.168.1.1 tcp dpt:22 /* !fw3: ssh (reflection) */ to:192.168.1.1
SNAT udp -- 192.168.1.0/24 192.168.1.1 udp dpt:22 /* !fw3: ssh (reflection) */ to:192.168.1.1
Chain zone_lan_prerouting (1 references)
target prot opt source destination
prerouting_lan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom lan prerouting rule chain */
DNAT tcp -- 192.168.1.0/24 lan-ip tcp dpt:8000 /* !fw3: home (reflection) */ to:192.168.1.1:80
DNAT udp -- 192.168.1.0/24 lan-ip udp dpt:8000 /* !fw3: home (reflection) */ to:192.168.1.1:80
DNAT tcp -- 192.168.1.0/24 lan-ip tcp dpt:2000 /* !fw3: ssh (reflection) */ to:192.168.1.1:22
DNAT udp -- 192.168.1.0/24 lan-ip udp dpt:2000 /* !fw3: ssh (reflection) */ to:192.168.1.1:22
Chain zone_wan_postrouting (2 references)
target prot opt source destination
postrouting_wan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom wan postrouting rule chain */
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
Chain zone_wan_prerouting (2 references)
target prot opt source destination
prerouting_wan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom wan prerouting rule chain */
DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8000 /* !fw3: home */ to:192.168.1.1:80
DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8000 /* !fw3: home */ to:192.168.1.1:80
DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:2000 /* !fw3: ssh */ to:192.168.1.1:22
DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:2000 /* !fw3: ssh */ to:192.168.1.1:22
from luci-app-v2ray.
v2ray 的iptables, 在这个 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 mark match 0xff
后面, 应该缺一条规则
# Ignore your V2Ray server's addresses
# It's very IMPORTANT, just be careful.
iptables -t nat -A V2RAY -d 123.123.123.123 -j RETURN
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
prerouting_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom prerouting rule chain */
zone_lan_prerouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_prerouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_prerouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
V2RAY tcp -- 0.0.0.0/0 0.0.0.0/0
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
V2RAY tcp -- 0.0.0.0/0 0.0.0.0/0
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
postrouting_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom postrouting rule chain */
zone_lan_postrouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_postrouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
zone_wan_postrouting all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
Chain V2RAY (2 references)
target prot opt source destination
RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 mark match 0xff
RETURN tcp -- 0.0.0.0/0 0.0.0.0/8
RETURN tcp -- 0.0.0.0/0 10.0.0.0/8
RETURN tcp -- 0.0.0.0/0 100.64.0.0/10
RETURN tcp -- 0.0.0.0/0 127.0.0.0/8
RETURN tcp -- 0.0.0.0/0 169.254.0.0/16
RETURN tcp -- 0.0.0.0/0 172.16.0.0/12
RETURN tcp -- 0.0.0.0/0 192.0.0.0/24
RETURN tcp -- 0.0.0.0/0 192.0.2.0/24
RETURN tcp -- 0.0.0.0/0 192.88.99.0/24
RETURN tcp -- 0.0.0.0/0 192.168.0.0/16
RETURN tcp -- 0.0.0.0/0 198.18.0.0/15
RETURN tcp -- 0.0.0.0/0 198.51.100.0/24
RETURN tcp -- 0.0.0.0/0 203.0.113.0/24
RETURN tcp -- 0.0.0.0/0 224.0.0.0/4
RETURN tcp -- 0.0.0.0/0 240.0.0.0/4
RETURN tcp -- 0.0.0.0/0 255.255.255.255
REDIRECT tcp -- 0.0.0.0/0 0.0.0.0/0 redir ports 1060
Chain postrouting_lan_rule (1 references)
target prot opt source destination
Chain postrouting_rule (1 references)
target prot opt source destination
Chain postrouting_wan_rule (1 references)
target prot opt source destination
Chain prerouting_lan_rule (1 references)
target prot opt source destination
Chain prerouting_rule (1 references)
target prot opt source destination
Chain prerouting_wan_rule (1 references)
target prot opt source destination
Chain zone_lan_postrouting (1 references)
target prot opt source destination
postrouting_lan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom lan postrouting rule chain */
SNAT tcp -- 192.168.1.0/24 192.168.1.1 tcp dpt:80 /* !fw3: home (reflection) */ to:192.168.1.1
SNAT udp -- 192.168.1.0/24 192.168.1.1 udp dpt:80 /* !fw3: home (reflection) */ to:192.168.1.1
SNAT tcp -- 192.168.1.0/24 192.168.1.1 tcp dpt:22 /* !fw3: ssh (reflection) */ to:192.168.1.1
SNAT udp -- 192.168.1.0/24 192.168.1.1 udp dpt:22 /* !fw3: ssh (reflection) */ to:192.168.1.1
Chain zone_lan_prerouting (1 references)
target prot opt source destination
prerouting_lan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom lan prerouting rule chain */
DNAT tcp -- 192.168.1.0/24 lan-ip tcp dpt:8000 /* !fw3: home (reflection) */ to:192.168.1.1:80
DNAT udp -- 192.168.1.0/24 lan-ip udp dpt:8000 /* !fw3: home (reflection) */ to:192.168.1.1:80
DNAT tcp -- 192.168.1.0/24 lan-ip tcp dpt:2000 /* !fw3: ssh (reflection) */ to:192.168.1.1:22
DNAT udp -- 192.168.1.0/24 lan-ip udp dpt:2000 /* !fw3: ssh (reflection) */ to:192.168.1.1:22
Chain zone_wan_postrouting (2 references)
target prot opt source destination
postrouting_wan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom wan postrouting rule chain */
MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3 */
Chain zone_wan_prerouting (2 references)
target prot opt source destination
prerouting_wan_rule all -- 0.0.0.0/0 0.0.0.0/0 /* !fw3: Custom wan prerouting rule chain */
DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8000 /* !fw3: home */ to:192.168.1.1:80
DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8000 /* !fw3: home */ to:192.168.1.1:80
DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:2000 /* !fw3: ssh */ to:192.168.1.1:22
DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:2000 /* !fw3: ssh */ to:192.168.1.1:22
from luci-app-v2ray.
- 默认情况下会自动添加 server ip 的 return 规则;
- 不处理和 ss 一起使用时造成的各种问题。
from luci-app-v2ray.
不是和ss一起使用的,ss是disable的状态
from luci-app-v2ray.
在这里会获取服务端地址:
luci-app-v2ray/root/etc/init.d/v2ray
Lines 768 to 770 in 5a9832a
在这里会将服务端 IP 插入 iptables
luci-app-v2ray/root/etc/init.d/v2ray
Line 278 in 5a9832a
除非 resolveip -4 -t 5 "$addr"
返回为空,或者你的地址不是 IPv4 才可能没有插入 iptables
from luci-app-v2ray.
具体是怎样访问不了,dns解析不了还是ip没响应?就算没服务器地址规则国内直连的应该会先RETURN,国内的应该能访问才对
from luci-app-v2ray.
刚刚确认了一下,服务器ip加入 v2ray chain里面了,我再观察一下
from luci-app-v2ray.
过一会dns解析不了
$ dig dropbox.com
; <<>> DiG 9.10.6 <<>> dropbox.com
;; global options: +cmd
;; connection timed out; no servers could be reached
from luci-app-v2ray.
看到一些错误日志
2019/11/01 12:34:01 [Warning] [157524355] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [v2ray.com/core/transport/internet/websocket: failed to dial WebSocket > v2ray.com/core/transport/internet/websocket: failed to dial to (wss://mydomainname.com/): > dial tcp: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed
from luci-app-v2ray.
@kuoruan 你路由器上websocket tls能用吗?
from luci-app-v2ray.
Related Issues (20)
- [Bounty] 持续性更新维护 HOT 5
- OpenWrt 22.03 version is not supported HOT 6
- 如何让ping和ssh 直连? HOT 2
- OpenWrt 22.03适配 HOT 39
- dokodemo_door代理端口异常 HOT 1
- webRTC leak
- bug报告:luci-app-v2ray总是自动给json文件添加不必要的斜杠
- v2ray 服务起不来 HOT 1
- CHNRoute和GFWlist更新失败 HOT 1
- whats this error
- public key is missing in website HOT 2
- 为什么v2ray-core 安装后 /etc/init.d/v2ray 文件会与luci-app-v2ray 的冲突导致安装失败? HOT 5
- Cannot open file kuoruan-public.keyecho
- Unknown package 'luci-app-v2ray'.
- freedom功能增强 HOT 1
- 为什么opkg源中要移除luci-app-v2ray这个包?
- I get http error 403 when trying to get the public key
- Service not starting
- daemon.err v2ray: Invalid V2Ray file. 无法启动v2ray HOT 1
- 如何配置进站出站? HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from luci-app-v2ray.