Comments (20)
Appears to be the same hardware but different model/brand name.... As more of these start appearing it might be easy to use the same handlers once they are finalised.
from zigbee-herdsman-converters.
What did you add to devices.js
?
from zigbee-herdsman-converters.
from zigbee-herdsman-converters.
That looks good, tz.on_off
should catch the {"state":"on"}
message. Could you provide the complete log? Could you also try just sending ON
instead of {"state":"on"}
.
from zigbee-herdsman-converters.
from zigbee-herdsman-converters.
On which zigbee2mqtt version are you?
from zigbee-herdsman-converters.
from zigbee-herdsman-converters.
Can you update to zigbee2mqtt 1.0.1 and try again?
from zigbee-herdsman-converters.
Thank you that seems to have fixed it. Simply sending on or off is sufficient.
from zigbee-herdsman-converters.
Hi Koenkk,
Since updating to v1.01 I'm having trouble paring a device that you helped me configure a few weeks ago. It seems to pair ok but throws an error when activated (it's a door contact). I've paired it many times, always with the same result, it worked previously (v1.0.0).
zigbee2mqtt:debug 2019-1-3 20:36:33 Received zigbee message of type 'devInterview' with data '"0x00158d000202bb30"'
zigbee2mqtt:warn 2019-1-3 20:36:33 Message without device!
zigbee2mqtt:debug 2019-1-3 20:36:34 Received zigbee message of type 'devInterview' with data '"0x00158d000202bb30"'
zigbee2mqtt:warn 2019-1-3 20:36:34 Message without device!
zigbee2mqtt:debug 2019-1-3 20:36:34 Received zigbee message of type 'devInterview' with data '"0x00158d000202bb30"'
zigbee2mqtt:warn 2019-1-3 20:36:34 Message without device!
zigbee2mqtt:debug 2019-1-3 20:36:35 Received zigbee message of type 'devInterview' with data '"0x00158d000202bb30"'
zigbee2mqtt:warn 2019-1-3 20:36:35 Message without device!
zigbee2mqtt:debug 2019-1-3 20:36:35 Received zigbee message of type 'devInterview' with data '"0x00158d000202bb30"'
zigbee2mqtt:warn 2019-1-3 20:36:35 Message without device!
zigbee2mqtt:debug 2019-1-3 20:36:35 Received zigbee message of type 'devIncoming' with data '"0x00158d000202bb30"' of device 'CSW_ADUROLIGHT' (0x00158d000202bb30)
zigbee2mqtt:info 2019-1-3 20:36:35 Device incoming...
zigbee2mqtt:info 2019-1-3 20:36:35 MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"type":"pairing","message":"device incoming"}'
zigbee2mqtt:debug 2019-1-3 20:36:35 Received zigbee message of type 'devStatus' with data '"online"' of device 'CSW_ADUROLIGHT' (0x00158d000202bb30)
zigbee-shepherd-converters:devices Configured '(cb) => device.write('ssIasZone', 'iasCieAddr', coordinator.device.getIeeeAddr(), cb)' with result 'OK' +7s
zigbee-shepherd-converters:devices Configured '(cb) => device.functional('ssIasZone', 'enrollRsp', {enrollrspcode: 0, zoneid: 23}, cb)' with result 'OK' +603ms
zigbee2mqtt:info 2019-1-3 20:36:37 Succesfully configured 0x00158d000202bb30 0x00158d000202bb30
zigbee2mqtt:debug 2019-1-3 20:36:37 Received zigbee message of type 'devChange' with data '{"cid":"ssIasZone","data":{"zoneState":1,"zoneStatus":32,"zoneId":23}}' of device 'CSW_ADUROLIGHT' (0x00158d000202bb30)
zigbee2mqtt:debug 2019-1-3 20:36:37 Received zigbee message of type 'devChange' with data '{"cid":"ssIasZone","data":{"zoneState":1,"zoneStatus":32,"zoneId":23}}' of device 'CSW_ADUROLIGHT' (0x00158d000202bb30)
Seems to have paired ok so then activate it:
zigbee2mqtt:debug 2019-1-3 20:38:28 Received zigbee message of type 'statusChange' with data '{"cid":"ssIasZone","zoneStatus":32}' of device 'undefined' (0x00124b0018ed35a7)
zigbee2mqtt:info 2019-1-3 20:38:28 New device with address 0x00124b0018ed35a7 connected!
zigbee2mqtt:info 2019-1-3 20:38:28 MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"type":"device_connected","message":"0x00124b0018ed35a7"}'
zigbee2mqtt:warn 2019-1-3 20:38:28 Device with modelID 'undefined' is not supported.
zigbee2mqtt:warn 2019-1-3 20:38:28 Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
zigbee2mqtt:debug 2019-1-3 20:38:28 Received zigbee message of type 'statusChange' with data '{"cid":"ssIasZone","zoneStatus":32}' of device 'CSW_ADUROLIGHT' (0x00158d000202bb30)
/opt/zigbee2mqtt/lib/extension/deviceReceive.js:56
return c.cid === cid && c.type === message.type;
^
TypeError: Cannot read property 'cid' of undefined
at mappedDevice.fromZigbee.filter (/opt/zigbee2mqtt/lib/extension/deviceReceive.js:56:26)
at Array.filter ()
at DeviceReceive.onZigbeeMessage (/opt/zigbee2mqtt/lib/extension/deviceReceive.js:54:52)
at extensions.filter.forEach (/opt/zigbee2mqtt/lib/controller.js:112:31)
at Array.forEach ()
at Controller.onZigbeeMessage (/opt/zigbee2mqtt/lib/controller.js:112:14)
at Zigbee.onMessage (/opt/zigbee2mqtt/lib/zigbee.js:173:18)
at emitOne (events.js:116:13)
at ZShepherd.emit (events.js:211:7)
at ZShepherd. (/opt/zigbee2mqtt/node_modules/zigbee-shepherd/lib/shepherd.js:137:14)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! [email protected] start: node index.js
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the [email protected] start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /root/.npm/_logs/2019-01-03T20_38_28_599Z-debug.log
Ii seems to be picking up a different device address somehow.
from zigbee-herdsman-converters.
Did you do a rm -rf node_modules && npm install
?
from zigbee-herdsman-converters.
I deleted the whole zigbee2mqtt folder and started again
from zigbee-herdsman-converters.
Did you make some manual changes afterwards?
from zigbee-herdsman-converters.
TBH I was struggling getting anything to pair and flailed around a bit, I now have a smart socket acting as a router could that affect anything? Happy to start over, what's the best way to proceed? Presumably I keep my devices.js?
from zigbee-herdsman-converters.
Tha shouldnt be a problem, can you start over? (without manual changes)
from zigbee-herdsman-converters.
Yes no problem, how would you recommend, just blow the whole thing away and pull from git then npm install, copy back my devices. js?
from zigbee-herdsman-converters.
The problem probably is your devices.js, how does the section look that you added?
from zigbee-herdsman-converters.
from zigbee-herdsman-converters.
Support for this device has been added in #198
from zigbee-herdsman-converters.
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
from zigbee-herdsman-converters.
Related Issues (20)
- New device template for SODA Circle S8 window handle `_TZE200_j7sgd8po` HOT 16
- The compiled zcl folder is missing. HOT 1
- Sonoff TRVZB exposes battery_low but never updates it HOT 2
- tuya ZG-204ZM setting motion detection mode fails (pull request #7553) HOT 6
- converter for Homr Multisensor
- Please add support for frient SIRZB-111
- Müller Tint GU10 blub is missing light entity HOT 1
- Fix /device/qa.ts definitions not loading HOT 1
- Add support for TS0601 _TZE200_d0yu2xgi LTECH CCT SE-20-250-1000-W2Z2 HOT 1
- Ubisys C4 - Commands not correctly sent to coordinator
- RTCGQ11LM is missing several values HOT 1
- Add support to Yale YMC420 HOT 1
- Support for Kwikset SMARTCODE_DEADBOLT_10 HOT 1
- Busch-Jaeger 6735/6736/6737: Make polling interval configurable HOT 10
- TUYA _TZ3000_ljhbw1c9 shown as battery powered
- Help to support custom ESP32C6 device HOT 1
- Incorrect cluster in Ubisys dimmer specs HOT 4
- Failed to configure - UNREPORTABLE-ATTRIBUTE - LeGrand 412171 HOT 8
- Tuya EAYCB-Z-2P / _TZ3000_zrm3oxsh
- Tuya Zigbee IR Blaster ZS06 not working after update HA to version 2024.8.0 HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from zigbee-herdsman-converters.