issue with TCA9548a multiplexer about mycodo

[kizniche]

You haven't provided enough information to know if you set it up correctly. The bug report template instructs to provide detailed step-by-step instructions for how to replicate the issue. This is the most crucial piece of information you can provide, but it appears to be omitted from your bug report.

[Nithalik]

I have received a new RPI5, i really didnt know how to show reproduction steps before.

1. Install RPI OS on brand new RPI 5, nothing every connected to GPIO, no settings changes other then enabling gpio
2. Install mycodo using curl -L https://kizniche.github.io/Mycodo/install | bash using recommended settings
3. go to system information and the below pic shows

looks like it is not a issue with the multiplexer, it is a issue possibly with the RPI5 and GPIO libraries itself. might be related to joan2937/pigpio#589

as this is not a issue with the multiplexer, please let me know if i should submit as a new one

[kizniche]

So you haven't enabled I2C and i2cdetect is showing you have active I2C busses?

[Nithalik]

you might have seen the un-updated comment.

i2c is enabled, was the only thing i did once installed the os

[dgedgedge]

Please consider the following issue on RapiOS :
raspberrypi/linux#5914