Unable to create simulation scenario with Megalos about kathara

[tcaiazzi]

Hi @Trourest186,

Sorry for the delay, I was on vacation until yesterday 😇

Can you please share also the output of the logs?

kubectl logs ${POD_NAME}

Thank you for your patience!

[Trourest186]

Thanks for your patience, I have uninstalled and redone carefully on CNI so the error is fixed!

[tcaiazzi]

Hi @Trourest186,

Thanks for opening the issue, we are happy you are using Megalos!

Have you installed the Megalos CNI and the Multus CNI in the cluster, before running the scenario?

You can find the installation instruction directly in the repository.

Let me know if it helps!
Tommaso

[Trourest186]

Hi @Trourest186,

Thanks for opening the issue, we are happy you are using Megalos!

Have you installed the Megalos CNI and the Multus CNI in the cluster, before running the scenario?

You can find the installation instruction directly in the repository.

Let me know if it helps! Tommaso

Thanks you!
I initially installed the below yml packages then ran the lab, and it gave me the above error:

• "multus-daemonset-thick.yml" from https://github.com/k8snetworkplumbingwg/multus-cni/blob/master/docs/quickstart.md
• "kathara-daemonset.yml" from https://raw.githubusercontent.com/KatharaFramework/Megalos-CNI/master/kathara-daemonset.yml for Megalos-CNI

Details of components in the cluster

Hope you continue to help!

Giang

[tcaiazzi]

Can you please share the output of the following command?

kubectl describe pod ${POD_NAME}

It should give us some info on what is happening!

[Trourest186]

Hi, I send you the pod information of the three devices that are failing

The pod of "a" device

The pod of "b" device

The pod of "c" device