0 hosts are up about kickthemout

[h3x0crypt]

hello sorry for the delay ! tomorrow i will provide to you all informations best regards 2017-01-26 20:08 GMT+01:00 David Schütz <[email protected]>:

…

@hexocrypt <https://github.com/hexocrypt> Please provide more information about your network, and the IP of your attacker machine/gateway/victim. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#20 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATdjwhtYFzumU1aeO5M2U6a3vaUSWW3Nks5rWO9FgaJpZM4LmJFZ> .

[xdavidhu]

Are you running it in a virtual machine? If yes, do you have your network card in bridge mode?

Also which error are you getting?
The one with the "something went wrong" or the "you can't kick anyone off"?

[k4m4]

@hexocrypt Please let us know if you've managed to resolve this issue.

[h3x0crypt]

hello i don't work on virtual machine i recived as a return : 0 hosts something went wrong then it back to terminal 2017-01-21 12:31 GMT+01:00 Nikolaos Kamarinakis <[email protected]>:

…

@hexocrypt <https://github.com/hexocrypt> Please let us know if you've managed to resolve this issue. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#20 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATdjwqNtepiHKUuz2VJX5y6-sn7YFrzhks5rUeyFgaJpZM4LmJFZ> .

[xdavidhu]

Oh so you recive someting went wrong... let me look at it.

[iamianthomas]

Try running nmap outside of it but like this...
nmap -Pn 192.168.0.1(Or your gateway)/24
{P.S.}Don't type Or your gateway...

[xdavidhu]

@hexocrypt Please provide more information about your network, and the IP of your attacker machine/gateway/victim.

[iamianthomas]

All good... Running Kali 2016.2 Network Normal Router Victim all devices Gateway 192.168.0.1 Cant install double tables, or terminal tables Thanks, Ian

…

On Thu, Jan 26, 2017 at 4:49 PM, hexocrypt ***@***.***> wrote: hello sorry for the delay ! tomorrow i will provide to you all informations best regards 2017-01-26 20:08 GMT+01:00 David Schütz ***@***.***>: > @hexocrypt <https://github.com/hexocrypt> Please provide more information > about your network, and the IP of your attacker machine/gateway/victim. > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <#20 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ ATdjwhtYFzumU1aeO5M2U6a3vaUSWW3Nks5rWO9FgaJpZM4LmJFZ> > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#20 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AX5icSAaXgtV02fdbKdWuxasjGUj-AtOks5rWRTmgaJpZM4LmJFZ> .

[h3x0crypt]

​ 2017-01-29 2:06 GMT+01:00 iamianthomas <[email protected]>:

…

All good... Running Kali 2016.2 Network Normal Router Victim all devices Gateway 192.168.0.1 Cant install double tables, or terminal tables Thanks, Ian On Thu, Jan 26, 2017 at 4:49 PM, hexocrypt ***@***.***> wrote: > hello sorry for the delay ! > tomorrow i will provide to you all informations > best regards > > 2017-01-26 20:08 GMT+01:00 David Schütz ***@***.***>: > > > @hexocrypt <https://github.com/hexocrypt> Please provide more > information > > about your network, and the IP of your attacker machine/gateway/victim. > > > > — > > You are receiving this because you were mentioned. > > Reply to this email directly, view it on GitHub > > <#20 (comment) >, > > or mute the thread > > <https://github.com/notifications/unsubscribe-auth/ > ATdjwhtYFzumU1aeO5M2U6a3vaUSWW3Nks5rWO9FgaJpZM4LmJFZ> > > > . > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > <#20 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ AX5icSAaXgtV02fdbKdWuxasjGUj-AtOks5rWRTmgaJpZM4LmJFZ> > . > — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#20 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATdjwuDdwoqta4H74rsCUjBE2r_mvA_Gks5rW-YHgaJpZM4LmJFZ> .

[k4m4]

@hexocrypt Could you provide us the info? Thanks.

[luisaleperozo]

How are u folks? Im working on a bridge VM my whole family are on the same network i want to kick them all out but somehow im only seeing my host machine and the getaway, What am i missing here? Some network configuration? Im sure they are all on the same router. Do this man a favor. Thank you mates.

[iamianthomas]

Why don't you just use aireplay-ng? You can use the -k option for an ip. For ex: aireplay-ng -0 0 -a (NETWORK BSSID) -k (THERE IP) (THE MONITOR MODE INTERFACE) so in my house it could be aireplay-ng -0 0 -a 00:19:3b:99:e2:80 -k 192.168.0.17 wlan0mon. First you would have to put device in monitor mode airmon-ng airmon-ng start (interface) boom. The new monitor mode interface will be (interface +mon at end) mine is wlan0mon Hope this helps... you can do this with as many terminals as you would like.

…

On Sun, Feb 5, 2017 at 8:25 PM, luisaleperozo ***@***.***> wrote: How are u folks? Im working on a bridge VM my whole family are on the same network i want to kick them all out but somehow im only seeing my host machine and the getaway, What am i missing here? Some network configuration? Im sure they are all on the same router. Do this man a favor. Thank you mates. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#20 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AX5iccyynWjx_0j7DIBwRizyl73Os-W7ks5rZnaEgaJpZM4LmJFZ> .

[h3x0crypt]

hey oh i think that the script make a monitor mode it self no need to run them by my self thanx anyway i will try it and get back to you 2017-02-06 16:31 GMT+01:00 iamianthomas <[email protected]>:

…

Why don't you just use aireplay-ng? You can use the -k option for an ip. For ex: aireplay-ng -0 0 -a (NETWORK BSSID) -k (THERE IP) (THE MONITOR MODE INTERFACE) so in my house it could be aireplay-ng -0 0 -a 00:19:3b:99:e2:80 -k 192.168.0.17 wlan0mon. First you would have to put device in monitor mode airmon-ng airmon-ng start (interface) boom. The new monitor mode interface will be (interface +mon at end) mine is wlan0mon Hope this helps... you can do this with as many terminals as you would like. On Sun, Feb 5, 2017 at 8:25 PM, luisaleperozo ***@***.***> wrote: > How are u folks? Im working on a bridge VM my whole family are on the same > network i want to kick them all out but somehow im only seeing my host > machine and the getaway, What am i missing here? Some network > configuration? Im sure they are all on the same router. Do this man a > favor. Thank you mates. > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > <#20 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AX5iccyynWjx_ 0j7DIBwRizyl73Os-W7ks5rZnaEgaJpZM4LmJFZ> > . > — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#20 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATdjwgQhz9Fy5PD3UJIAgIZ10MzbIFf8ks5rZzzvgaJpZM4LmJFZ> .

[iamianthomas]

No problem

…

On Mon, Feb 6, 2017 at 12:51 PM, hexocrypt ***@***.***> wrote: hey oh i think that the script make a monitor mode it self no need to run them by my self thanx anyway i will try it and get back to you 2017-02-06 16:31 GMT+01:00 iamianthomas ***@***.***>: > Why don't you just use aireplay-ng? You can use the -k option for an ip. > For ex: aireplay-ng -0 0 -a (NETWORK BSSID) -k (THERE IP) (THE MONITOR MODE > INTERFACE) > so in my house it could be aireplay-ng -0 0 -a 00:19:3b:99:e2:80 -k > 192.168.0.17 wlan0mon. > First you would have to put device in monitor mode > airmon-ng > airmon-ng start (interface) boom. The new monitor mode interface will be > (interface +mon at end) > mine is wlan0mon > > > Hope this helps... > you can do this with as many terminals as you would like. > > On Sun, Feb 5, 2017 at 8:25 PM, luisaleperozo ***@***.***> > wrote: > > > How are u folks? Im working on a bridge VM my whole family are on the > same > > network i want to kick them all out but somehow im only seeing my host > > machine and the getaway, What am i missing here? Some network > > configuration? Im sure they are all on the same router. Do this man a > > favor. Thank you mates. > > > > — > > You are receiving this because you commented. > > Reply to this email directly, view it on GitHub > > <#20 (comment) >, > > or mute the thread > > <https://github.com/notifications/unsubscribe-auth/AX5iccyynWjx_ > 0j7DIBwRizyl73Os-W7ks5rZnaEgaJpZM4LmJFZ> > > > . > > > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <#20 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ ATdjwgQhz9Fy5PD3UJIAgIZ10MzbIFf8ks5rZzzvgaJpZM4LmJFZ> > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#20 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AX5icfZDBcSnQ7hn7Exwb2BUWapMulXlks5rZ121gaJpZM4LmJFZ> .

[k4m4]

Closing due to inactivity. If anyone is still experiencing this problem, please create a new issue. Thanks!

[Mushebeq]

hello i've got the same error on ubuntu app on windows 10

[bds2115]

WARNING: There are 0 hosts up on you network except your gateway.
You can't kick anyone off