Missing hole on other revision of Mainboard about ps2easyhdd

[jeffqchen]

I'll add that in soon. With the two existing holes, it should be sturdy enough to use for the time being.

[jeffqchen]

I have moved the M3 screw position to use the hole you indicated. Please check the new files.

[burgsth]

The hole for the right ic needs to be slightly larger

[jeffqchen]

The two holes are of the same size. However since it's on a precarious location, it might end up being printed crooked. You can widen it by shoving the M3 hex screw driver bit into it and twist a few times.

[burgsth]

Sorry, I ment the VS32AH hole. I've marked the part red.

On the other part, there are some condensators which need a change in the cover to fit. (marked black)

[jeffqchen]

Did fixes according to your info. Please check the updated pieces.

[burgsth]

Fits nearly perfect, except there ist only a round hole on my pcb and it seems there is a long hole on yours on the right side in the middle of the pcb. Cut it and and it fitted perfect. Will continue assembling and report any further informations.

[jeffqchen]

Thanks. I've removed that stub. It only exists on the newer rev.

[burgsth]

Assembles fine now without flaws, thank you very very much for your help!
Only thing maybe is to make the holes for screw heads slightly larger, I need to get screws with smaller heads.

I have some more slim and fat adapters. If you are interessted I can take a look at the mainboard revision and testprint your designs to verify.

[jeffqchen]

Thank you for your help. I'm still working on the 10281 for now and it will be available as soon as it's verified by me personally. Hopefully all the fixes you suggested were already put in it. Thank you for all your help!