Adapterproblems - RFLearn not working about iobroker.broadlink2

[frankjoke]

Hi Miro,
at first reinstalling adapter does not solve problems if there are no installation errors., if you try older adapter by selecting them in admin it is impossible that adapter changes himself back unless you do a update withadmin for all.

But now to the problem, you cklick on learn mode in object view of admin?
Does the red led on RM light up?

Do you use the learn or the rf-sweep-learn? They work kompletely different. the normal learn can learn also RF and you do a normal short press on your remote. with the rf-learn you need to press the remote for 10 seconds and then shortely reelease and press short again.

In both cases the red led should stop when the RM fiund the signal.

If red led does not go on I need you to set adapter to debug mode and restart him and copy the log generated for the fist 2 minutes including a test for learning.

The reason is that it could be that the RM-adapter changed it's address.

Problem finding should start to look in log if adapter finds the RM and provide data (like the temperature for some RM's).. The next step is to try to learn (normal learn) and look if red led lights up. If led does not g on (and out after 30 seconds by itself without learning anything) the RM or the communication with it is broken.

If red LED lights up but adapter is not learning anything: RM broken or cannot learn the remote command.

p.s. forgive me some mistakes, typing on mobile....

[frankjoke]

Oh yes, if your led goes on when learning and off after you press what you want to learn on remote but no line is generates in broadlink2 'L' then the code you learned is already learned!

[frankjoke]

Any feedback? I would like to close the case if it is resolved or need more info to help to resolve it!

[M1r0o]

Hey,
sorry for answering late.
I think, my broadlink is not working any more (no reactions any more). I have to buy a new one - so you can close that case.

[frankjoke]

Ok, let me know if yoiu have any problem with the new device!