Sending code using "SendCode" do not work ... about iobroker.broadlink2

[frankjoke]

Hi Apollon!

I cheched and tested and send_code is working with me.
The javascript command is:
sendTo('broadlink2.0','send_code','RM:RMPROPLUS.CODE_000000730000000B0020002000400020002000200020002000200040002000200040002000200020002000400040002000200CC5'))

where 'RM:RMPROPLUS' need to be exchanged with your device name.

The code itself seems not to be valid, at least my RM does not blink on it which means it does not send anything.

I checked my IR codes which are generated when I learn the device and their length is 1185+ caracters.
Yours is only 105!

[frankjoke]

sorry, 185 and NOT 1185 caracters is my length!

[Apollon77]

On one hand I found out that I need to recode "Protno"-codes ... my try was to directly put the value in the "SendCode" state in Admin under the respective device ... I not used JS.
Will also retest

[frankjoke]

Ok, if you don't use javascript sendTo then you should follow following path to create states with own codes:
Learn any code
Go in admin.objects to the 'pencil'
go to 'native' and enter code in 'code' line without 'CODE_'
rename state to whatever.

In this way you can change codes of any object in '.L.' area of RM: devices.
It means that you can copy this way also codes from one to another device.

[Apollon77]

In the end I did it that way, but the idea was:

Use "SendCode" State to send while in learning mode in parallel :-) Yes this works. So I only need to paste the code to send in that one field and get the "L"-objects created automatically while it is received :-)

Did you tried to set "SendCode" State directly with "CODE_..." as value ... because this is what not works

[Apollon77]

In the end I did it that way, but the idea was:

Use "SendCode" State to send while in learning mode in parallel :-) Yes this works. So I only need to paste the code to send in that one field and get the "L"-objects created automatically while it is received :-)

Did you tried to set "SendCode" State directly with "CODE_..." as value ... because this is what not works