Fix Alarm control panel not require code in Homekit about core

[rvanamb]

Did you try putting in a a fake code like 0000 in the settings for the alarm panel card.

…

On Sat, Jun 15, 2024, 11:46 AM Seth Ryder ***@***.***> wrote: I too am having issues with this with Simplisafe: Failed to call service alarm_control_panel/alarm_arm_home. Validation error: Arming requires a code but none was given for alarm_control_panel.alarm_control_panel — Reply to this email directly, view it on GitHub <#119125 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AP4SMEU7YVM7PU4ZOPWYYNLZHSDW5AVCNFSM6AAAAABI72IBSGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZQGQ4TAOJRGE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[hakk2020]

Thank you for reporting. I have the same issue.

[dronenb]

I am having this issue as well.

[dronenb]

I found a workaround was to set the code in the Alarm Control Panel entity to something, doesn't have to be a real code (0000 should work).

[pwendl]

This is not limited to Homekit. I am seeing similar behavior with the Simplisafe integration; however, inputting a dummy code as described doesn't work. I am able to submit a valid code that I obtain by repeating the initial Simplisafe integration steps to get a new code; however, I must input that code every time before HA will submit the request to Simplisafe. I can submit a different issue, if necessary, to document this but I thought it was still useful information for this issue.

[lymanepp]

I'm having the same problem with Abode via HomeKit.

Note that this ticket might not get assigned since it's lacking a link to the documentation - https://www.home-assistant.io/integrations/homekit_controller/

[rvanamb]

Putting in a default pin like 0000 does work for me as a work around. Also the issue is caused by a change they made to the alarm panel really has nothing to do with abode. Also mine connects under homekit controller integration so I can control over local network. Avoid cloud integration as much as possible.

…

On Mon, Jun 10, 2024, 10:04 AM lymanepp ***@***.***> wrote: I'm having the same problem with Abode via HomeKit. Note that this ticket might not get assigned since it's lacking a link to the documentation - https://www.home-assistant.io/integrations/abode/ — Reply to this email directly, view it on GitHub <#119125 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AP4SMEUNDJCAMRNATYFREU3ZGXMARAVCNFSM6AAAAABI72IBSGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJYHA4DENJUHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[home-assistant]

Hey there @Jc2k, @bdraco, mind taking a look at this issue as it has been labeled with an integration (homekit_controller) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of homekit_controller can trigger bot actions by commenting:

• @home-assistant close Closes the issue.
• @home-assistant rename Awesome new title Renames the issue.
• @home-assistant reopen Reopen the issue.
• @home-assistant unassign homekit_controller Removes the current integration label and assignees on the issue, add the integration domain after the command.
• @home-assistant add-label needs-more-information Add a label (needs-more-information, problem in dependency, problem in custom component) to the issue.
• @home-assistant remove-label needs-more-information Remove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.

_{^{(message by CodeOwnersMention)}}

---

homekit_controller documentation
homekit_controller source
_{^{(message by IssueLinks)}}

[Depechie]

I have reported a similar problem... also HomeKit and the alarm panel, but 'with' a code.
#119541

[chpeck]

I am having the same issue. Is this related to this post?

https://developers.home-assistant.io/blog/2024/05/22/alarm_control_panel_validation/

Where is this code_arm_required set?

[sethryder]

I too am having issues with this with Simplisafe:

Failed to call service alarm_control_panel/alarm_arm_home. Validation error: Arming requires a code but none was given for alarm_control_panel.alarm_control_panel

[chpeck]

Did you try putting in a a fake code like 0000 in the settings for the alarm panel card.
…
On Sat, Jun 15, 2024, 11:46 AM Seth Ryder @.> wrote: I too am having issues with this with Simplisafe: Failed to call service alarm_control_panel/alarm_arm_home. Validation error: Arming requires a code but none was given for alarm_control_panel.alarm_control_panel — Reply to this email directly, view it on GitHub <#119125 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AP4SMEU7YVM7PU4ZOPWYYNLZHSDW5AVCNFSM6AAAAABI72IBSGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZQGQ4TAOJRGE . You are receiving this because you authored the thread.Message ID: @.>

This worked for me.