Comments (8)
I've given up using this integration. It does not work with Bluetooth proxies reliable.
What's working for me, is the Inkbird sensor component of ESPHome:
esp32_ble_tracker:
scan_parameters:
interval: 1100ms
window: 1100ms
active: true
continuous: True
bluetooth_proxy:
active: true
sensor:
- platform: inkbird_ibsth1_mini
mac_address: <my MAC address>
temperature:
name: "Inkbird IBS-TH2/P01B Temperature"
battery_level:
name: "Inkbird IBS-TH2/P01B Battery Level"
from core.
Hey there @bdraco, mind taking a look at this issue as it has been labeled with an integration (inkbird
) you are listed as a code owner for? Thanks!
Code owner commands
Code owners of inkbird
can trigger bot actions by commenting:
@home-assistant close
Closes the issue.@home-assistant rename Awesome new title
Renames the issue.@home-assistant reopen
Reopen the issue.@home-assistant unassign inkbird
Removes the current integration label and assignees on the issue, add the integration domain after the command.@home-assistant add-label needs-more-information
Add a label (needs-more-information, problem in dependency, problem in custom component) to the issue.@home-assistant remove-label needs-more-information
Remove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.
(message by CodeOwnersMention)
inkbird documentation
inkbird source
(message by IssueLinks)
from core.
I purchased the P01B yesterday and this is my experience so far. I used the Inkbird app to register and add the device to the app, this was not an easy process because the device was not listed in the app device list, you have to select IBS-THS. Once I had done this I installed the HA Inkbird integration and it recognised the device and added it. This was all done in the house so next step was to install in the pool. I have shelly bluetooth proxies outside so expected the P01B to hook up to them but despite a lot of messing around with moving it right next to the bluetooth proxy and reloading the integration I had no joy in getting the sensor to show up as connected in HA. So I went to bed..... This morning at 4am the sensor must have connected and seemed to be working. What I have noticed though, is that the temperature update seems to be every 2 hours, whereas the bluetooth signal strength is more frequently updated. Later in the day it did not seem to be getting updated though.
I decided to purchase an ESP32 and set that up as a bluetooth proxy to see if there was any change. I disabled the Shelly bluetooth proxies and put the ESP32 outside near the pool. After I did this the P01B was updating temperature more frequently overnight but then seemed to stop in the morning?
I am not sure what is going on here because bluetooth signal strength is being reported frequently but not battery or temperature? Could it be that unless there is a significant change in temperature or battery status the data is not sent?
from core.
I am in the same boat, did you find any solution?
from core.
Adding a USB Bluetooth module to HA fixed it for me.
from core.
I am in the same boat, did you find any solution?
Despite thinking I got this working, I seem to be having intermittent issues with loss of connection, I installed an ESP32 module outside in line of sight with the pool thermometer but sometimes it works and then for some reason stops. Rebooting the ESP32 seems to get it connected again, I'm wondering if the actual thermometer goes into deep sleep because it has not been connected to it's app?
from core.
I purchased the P01B yesterday and this is my experience so far. I used the Inkbird app to register and add the device to the app, this was not an easy process because the device was not listed in the app device list, you have to select IBS-THS. Once I had done this I installed the HA Inkbird integration and it recognised the device and added it. This was all done in the house so next step was to install in the pool. I have shelly bluetooth proxies outside so expected the P01B to hook up to them but despite a lot of messing around with moving it right next to the bluetooth proxy and reloading the integration I had no joy in getting the sensor to show up as connected in HA. So I went to bed..... This morning at 4am the sensor must have connected and seemed to be working. What I have noticed though, is that the temperature update seems to be every 2 hours, whereas the bluetooth signal strength is more frequently updated. Later in the day it did not seem to be getting updated though.
I decided to purchase an ESP32 and set that up as a bluetooth proxy to see if there was any change. I disabled the Shelly bluetooth proxies and put the ESP32 outside near the pool. After I did this the P01B was updating temperature more frequently overnight but then seemed to stop in the morning?
I am not sure what is going on here because bluetooth signal strength is being reported frequently but not battery or temperature? Could it be that unless there is a significant change in temperature or battery status the data is not sent?
It's nothing to do with a lack of significant temperature changes. I am slowly losing the will on this one.
from core.
I've given up using this integration. It does not work with Bluetooth proxies reliable.
What's working for me, is the Inkbird sensor component of ESPHome:
esp32_ble_tracker: scan_parameters: interval: 1100ms window: 1100ms active: true continuous: True bluetooth_proxy: active: true sensor: - platform: inkbird_ibsth1_mini mac_address: <my MAC address> temperature: name: "Inkbird IBS-TH2/P01B Temperature" battery_level: name: "Inkbird IBS-TH2/P01B Battery Level"
I too have given up on the integration now using the above with ESP32
from core.
Related Issues (20)
- Cannot change credentials of user HOT 1
- WARNING: Waiting on integrations to complete setup HOT 1
- duplicated upnp devices detected HOT 1
- Airtouch 5 integration stopped working after console upgrade HOT 3
- Synology photos shared items are not visible in the media browser HOT 1
- Tuya fan entity (Duux Whisper Flex) automatically starts oscillating when clicked wherever in the interface HOT 1
- Here Travel Time detected blocking call to listdir with args / 2024.7.0b4 HOT 3
- Smartlife Tuya integration HOT 4
- Error handling request - ConnectionResetError: Cannot write to closing transport
- Somfy Cover shows strange and missing values. HOT 1
- Met.no not reporting weather data HOT 3
- Buienradar unable to retrieve data HOT 3
- AlarmDecoder integration sometimes internally crashes and silently stops updating HOT 1
- Amber Electric integration suddenly failing HOT 13
- Clear nights reporting as sunny on weather forecast with Openweathermap HOT 1
- Blink: Fails to properly recover after a system restart. HOT 1
- Extremely poor performance of compilation of statistics on MariaDB HOT 1
- Tuya integration problem HOT 1
- Turning on a Samsung Windfree airco via HA turns the display light on HOT 1
- Energy Dashboard doesn't generate a _cost if the value is negative
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from core.