Comments (17)
sp222222
commented on July 28, 2024
it's driving me nuts :)
from slinger.
GerryDazoo
commented on July 28, 2024
The IP address/port for your Slingbox has changed.
“Error connecting to ('192.168.1.88', 5224)”
When that happens and it can’t find the slingbox it tries to probe for it on the network like the Sling code does. But you are missing a python module that’s needed to do the probing (“netifaces’). You should be able to install that with PIP or you can run the sling code and get the new IP/port.
* Gerry
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 2:48 AM
To: GerryDazoo/Slinger ***@***.***>
Cc: Subscribed ***@***.***>
Subject: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
500 works fine with normal paid app
I get this running python. only thing changed is my router....
S:\S2022\SLING VLC\SLING VLC\ST500_2022>ss.py config.ini
Version : 3.07 Running on Windows-7-6.1.7601-SP1 pid= 9832
Using config file config.ini
Connection Manager Running on port 5960 with 10 max streams....
Streamer Running: 10 config.ini 5960
starting up on port 5960
Checking for slingbox at ('192.168.1.88', 5224)
Reading Custom Remote definition from S:\S2022\SLING VLC\SLING VLC
mote_500.txt
* Serving Flask app 'ss'
* Debug mode: off
WARNING: This is a development server. Do not use it in a productio
Use a production WSGI server instead.
* Running on all addresses (0.0.0.0)
* Running on http://127.0.0.1:5961/
* Running on http://192.168.1.8:5961/
Press CTRL+C to quit
Error connecting to ('192.168.1.88', 5224)
Exception in thread Thread-2:
Traceback (most recent call last):
File "C:\Program Files\Python38\lib\threading.py", line 932, in _
er
self.run()
File "C:\Program Files\Python38\lib\threading.py", line 870, in r
self._target(*self._args, **self._kwargs)
File "S:\S2022\SLING VLC\SLING VLC\ST500_2022\ss.py", line 527, i
boxes = find_slingbox_info()
File "S:\S2022\SLING VLC\SLING VLC\ST500_2022\ss.py", line 78, in
x_info
import netifaces
ModuleNotFoundError: No module named 'netifaces'
08/31/2022, 02:33:01 RemoteControl connection from ('192.168.1.8'
Starting remote control stream handler for ('192.168.1.8', 56592)
Remote Control Connected
Remote Code: 2 0x0 0x0 0x2
Button Clicked ImmutableMultiDict([('Power', '1'), ('Digits', '')])
—
Reply to this email directly, view it on GitHub <#33> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQMRKITBHDJUD7JE3QLV3352TANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you are subscribed to this thread. <https://github.com/notifications/beacon/AYOYVQO2E4RVYZEHG3MSTTTV3352TA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNFJFZXG5LFVJRW63LNMVXHIX3JMTHFBYCEPY.gif> Message ID: ***@***.***>
from slinger.
tom76017
commented on July 28, 2024
I force all servers on my LAN to have a fixed local IP address, I do this in my routers DHCP. When I upgrade my router, I have to resetup the manual DHCP addresses. So both my Slingbox and video source (TiVo Mini) have static addresses.
from slinger.
sp222222
commented on July 28, 2024
I gave it static IP and gave it same port IP it had before on the old
router.
pip netifaces will resolve it? funny the remote page works but not the
sling500 itself
…On Wed, Aug 31, 2022 at 7:20 AM GerryDazoo ***@***.***> wrote:
The IP address/port for your Slingbox has changed.
“Error connecting to ('192.168.1.88', 5224)”
When that happens and it can’t find the slingbox it tries to probe for it
on the network like the Sling code does. But you are missing a python
module that’s needed to do the probing (“netifaces’). You should be able to
install that with PIP or you can run the sling code and get the new IP/port.
* Gerry
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 2:48 AM
To: GerryDazoo/Slinger ***@***.***>
Cc: Subscribed ***@***.***>
Subject: [GerryDazoo/Slinger] new router , same files - 500 won't connect
again (Issue #33)
500 works fine with normal paid app
I get this running python. only thing changed is my router....
S:\S2022\SLING VLC\SLING VLC\ST500_2022>ss.py config.ini
Version : 3.07 Running on Windows-7-6.1.7601-SP1 pid= 9832
Using config file config.ini
Connection Manager Running on port 5960 with 10 max streams....
Streamer Running: 10 config.ini 5960
starting up on port 5960
Checking for slingbox at ('192.168.1.88', 5224)
Reading Custom Remote definition from S:\S2022\SLING VLC\SLING VLC
mote_500.txt
* Serving Flask app 'ss'
* Debug mode: off
WARNING: This is a development server. Do not use it in a productio
Use a production WSGI server instead.
* Running on all addresses (0.0.0.0)
* Running on http://127.0.0.1:5961/
* Running on http://192.168.1.8:5961/
Press CTRL+C to quit
Error connecting to ('192.168.1.88', 5224)
Exception in thread Thread-2:
Traceback (most recent call last):
File "C:\Program Files\Python38\lib\threading.py", line 932, in _
er
self.run()
File "C:\Program Files\Python38\lib\threading.py", line 870, in r
self._target(*self._args, **self._kwargs)
File "S:\S2022\SLING VLC\SLING VLC\ST500_2022\ss.py", line 527, i
boxes = find_slingbox_info()
File "S:\S2022\SLING VLC\SLING VLC\ST500_2022\ss.py", line 78, in
x_info
import netifaces
ModuleNotFoundError: No module named 'netifaces'
08/31/2022, 02:33:01 RemoteControl connection from ('192.168.1.8'
Starting remote control stream handler for ('192.168.1.8', 56592)
Remote Control Connected
Remote Code: 2 0x0 0x0 0x2
Button Clicked ImmutableMultiDict([('Power', '1'), ('Digits', '')])
—
Reply to this email directly, view it on GitHub <
#33> , or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQMRKITBHDJUD7JE3QLV3352TANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you are subscribed to this thread. <
https://github.com/notifications/beacon/AYOYVQO2E4RVYZEHG3MSTTTV3352TA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNFJFZXG5LFVJRW63LNMVXHIX3JMTHFBYCEPY.gif>
Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG3NKOOH3O3UDGOOC6TV345XHANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from slinger.
GerryDazoo
commented on July 28, 2024
Can you send the startup output from the server. This will help in figuring out what’s happening.
From: tom76017 ***@***.***>
Sent: Wednesday, August 31, 2022 9:01 AM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
I force all servers on my LAN to have a fixed local IP address, I do this in my routers DHCP. When I upgrade my router, I have to resetup the manual DHCP addresses. So both my Slingbox and video source (TiVo Mini) have static addresses.
—
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif> Message ID: ***@***.*** ***@***.***> >
from slinger.
sp222222
commented on July 28, 2024
that’s what I posted on the github issue
…On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.***> wrote:
Can you send the startup output from the server. This will help in
figuring out what’s happening.
From: tom76017 ***@***.***>
Sent: Wednesday, August 31, 2022 9:01 AM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
I force all servers on my LAN to have a fixed local IP address, I do this
in my routers DHCP. When I upgrade my router, I have to resetup the manual
DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
static addresses.
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif>
Message ID: ***@***.*** ***@***.***> >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from slinger.
GerryDazoo
commented on July 28, 2024
Sorry Mike that was meant for someone else.
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 2:04 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
that’s what I posted on the github issue
On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***> > wrote:
Can you send the startup output from the server. This will help in
figuring out what’s happening.
From: tom76017 ***@***.*** <mailto:***@***.***> >
Sent: Wednesday, August 31, 2022 9:01 AM
To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***> >
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
I force all servers on my LAN to have a fixed local IP address, I do this
in my routers DHCP. When I upgrade my router, I have to resetup the manual
DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
static addresses.
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif>
Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***> > >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.*** <mailto:***@***.***> >
—
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif> Message ID: ***@***.*** ***@***.***> >
from slinger.
sp222222
commented on July 28, 2024
GerryDazoo/Slinger:
Can we schedule a time tomorrow afternoon to guide me through these
commands? Am I using putty remotely
to get into my parent’s router? And also my stumble with my 500 since
switching routers. I will try the slingsetup from Dish (owners) and see
if that works. I don’t see why my other two solos went fine once I took
them iut of dhcp pool and gave them same static IP and port they had
before, hit quickly button on the back and they both started working again.
…On Wed, Aug 31, 2022 at 2:19 PM GerryDazoo ***@***.***> wrote:
Sorry Mike that was meant for someone else.
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 2:04 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
that’s what I posted on the github issue
On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***>
> wrote:
> Can you send the startup output from the server. This will help in
> figuring out what’s happening.
>
>
>
> From: tom76017 ***@***.*** <mailto:***@***.***> >
> Sent: Wednesday, August 31, 2022 9:01 AM
> To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
> Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.***
<mailto:***@***.***> >
> Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> connect again (Issue #33)
>
>
>
> I force all servers on my LAN to have a fixed local IP address, I do this
> in my routers DHCP. When I upgrade my router, I have to resetup the
manual
> DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
> static addresses.
>
> —
> Reply to this email directly, view it on GitHub <
> #33 (comment)>
> , or unsubscribe <
>
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you commented. <
>
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif
>
> Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#33 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.*** <mailto:***@***.***> >
>
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif>
Message ID: ***@***.*** ***@***.***> >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG3ERO3VXNU4AARUFNLV36O3FANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from slinger.
GerryDazoo
commented on July 28, 2024
Sure we can do that. What time did you have in mind? Aren’t you working days?
* Gerry
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 3:21 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
GerryDazoo/Slinger:
Can we schedule a time tomorrow afternoon to guide me through these
commands? Am I using putty remotely
to get into my parent’s router? And also my stumble with my 500 since
switching routers. I will try the slingsetup from Dish (owners) and see
if that works. I don’t see why my other two solos went fine once I took
them iut of dhcp pool and gave them same static IP and port they had
before, hit quickly button on the back and they both started working again.
On Wed, Aug 31, 2022 at 2:19 PM GerryDazoo ***@***.*** <mailto:***@***.***> > wrote:
Sorry Mike that was meant for someone else.
From: sp222222 ***@***.*** <mailto:***@***.***> >
Sent: Wednesday, August 31, 2022 2:04 PM
To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***> >
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
that’s what I posted on the github issue
On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> wrote:
> Can you send the startup output from the server. This will help in
> figuring out what’s happening.
>
>
>
> From: tom76017 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> Sent: Wednesday, August 31, 2022 9:01 AM
> To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***>
<mailto:***@***.***> >
> Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> connect again (Issue #33)
>
>
>
> I force all servers on my LAN to have a fixed local IP address, I do this
> in my routers DHCP. When I upgrade my router, I have to resetup the
manual
> DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
> static addresses.
>
> —
> Reply to this email directly, view it on GitHub <
> #33 (comment)>
> , or unsubscribe <
>
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you commented. <
>
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif
>
> Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***> ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#33 (comment) <#33 (comment)>
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
>
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif>
Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***> > >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG3ERO3VXNU4AARUFNLV36O3FANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.*** <mailto:***@***.***> >
—
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQNOUWIDNOOR25JZCHDV36WADANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AYOYVQL4D52N6WPUZN6O25DV36WADA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQMO4I.gif> Message ID: ***@***.*** ***@***.***> >
from slinger.
sp222222
commented on July 28, 2024
I should be home by 1pm ET tomorrow if you can start then. I fixed the port
issue on 500 using 3.07. I guess the default 500 port is 5213 mine was
forced to 5224 but simple changes to router fixed it. I could not get into
slingbox setuo though which makes me leary on buying another one on ebay.
We can attempt the ssh stuff tomorrow. I put the public key on parents
router and have both files ready to go. public and private key files.
Call me afternoon
Thanks
…On Wed, Aug 31, 2022 at 4:43 PM GerryDazoo ***@***.***> wrote:
Sure we can do that. What time did you have in mind? Aren’t you working
days?
* Gerry
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 3:21 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
GerryDazoo/Slinger:
Can we schedule a time tomorrow afternoon to guide me through these
commands? Am I using putty remotely
to get into my parent’s router? And also my stumble with my 500 since
switching routers. I will try the slingsetup from Dish (owners) and see
if that works. I don’t see why my other two solos went fine once I took
them iut of dhcp pool and gave them same static IP and port they had
before, hit quickly button on the back and they both started working again.
On Wed, Aug 31, 2022 at 2:19 PM GerryDazoo ***@***.*** <mailto:***@***.***>
> wrote:
> Sorry Mike that was meant for someone else.
>
>
>
> From: sp222222 ***@***.*** <mailto:***@***.***> >
> Sent: Wednesday, August 31, 2022 2:04 PM
> To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
> Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.***
<mailto:***@***.***> >
> Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> connect again (Issue #33)
>
>
>
> that’s what I posted on the github issue
>
> On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***>
<mailto:***@***.***>
> > wrote:
>
> > Can you send the startup output from the server. This will help in
> > figuring out what’s happening.
> >
> >
> >
> > From: tom76017 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> > Sent: Wednesday, August 31, 2022 9:01 AM
> > To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
>
> > Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
>; Comment ***@***.*** <mailto:***@***.***>
> <mailto:***@***.***> >
> > Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> > connect again (Issue #33)
> >
> >
> >
> > I force all servers on my LAN to have a fixed local IP address, I do
this
> > in my routers DHCP. When I upgrade my router, I have to resetup the
> manual
> > DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
> > static addresses.
> >
> > —
> > Reply to this email directly, view it on GitHub <
> >
#33 (comment)>
> > , or unsubscribe <
> >
>
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you commented. <
> >
>
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif
> >
> > Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#33 (comment) <
#33 (comment) >
> >,
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> >
>
>
>
> —
> Reply to this email directly, view it on GitHub <
> #33 (comment)>
> , or unsubscribe <
>
https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you commented. <
>
https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif
>
> Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#33 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A2NHSG3ERO3VXNU4AARUFNLV36O3FANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.*** <mailto:***@***.***> >
>
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQNOUWIDNOOR25JZCHDV36WADANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQL4D52N6WPUZN6O25DV36WADA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQMO4I.gif>
Message ID: ***@***.*** ***@***.***> >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG2RTQV5P6ZIGOEN32DV367WFANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from slinger.
GerryDazoo
commented on July 28, 2024
OK, sounds like a plan.
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 5:45 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
I should be home by 1pm ET tomorrow if you can start then. I fixed the port
issue on 500 using 3.07. I guess the default 500 port is 5213 mine was
forced to 5224 but simple changes to router fixed it. I could not get into
slingbox setuo though which makes me leary on buying another one on ebay.
We can attempt the ssh stuff tomorrow. I put the public key on parents
router and have both files ready to go. public and private key files.
Call me afternoon
Thanks
On Wed, Aug 31, 2022 at 4:43 PM GerryDazoo ***@***.*** <mailto:***@***.***> > wrote:
Sure we can do that. What time did you have in mind? Aren’t you working
days?
* Gerry
From: sp222222 ***@***.*** <mailto:***@***.***> >
Sent: Wednesday, August 31, 2022 3:21 PM
To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***> >
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
GerryDazoo/Slinger:
Can we schedule a time tomorrow afternoon to guide me through these
commands? Am I using putty remotely
to get into my parent’s router? And also my stumble with my 500 since
switching routers. I will try the slingsetup from Dish (owners) and see
if that works. I don’t see why my other two solos went fine once I took
them iut of dhcp pool and gave them same static IP and port they had
before, hit quickly button on the back and they both started working again.
On Wed, Aug 31, 2022 at 2:19 PM GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> wrote:
> Sorry Mike that was meant for someone else.
>
>
>
> From: sp222222 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> Sent: Wednesday, August 31, 2022 2:04 PM
> To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***>
<mailto:***@***.***> >
> Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> connect again (Issue #33)
>
>
>
> that’s what I posted on the github issue
>
> On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> > wrote:
>
> > Can you send the startup output from the server. This will help in
> > figuring out what’s happening.
> >
> >
> >
> > From: tom76017 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***> >
> > Sent: Wednesday, August 31, 2022 9:01 AM
> > To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
>
> > Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
>; Comment ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> <mailto:***@***.***> >
> > Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> > connect again (Issue #33)
> >
> >
> >
> > I force all servers on my LAN to have a fixed local IP address, I do
this
> > in my routers DHCP. When I upgrade my router, I have to resetup the
> manual
> > DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
> > static addresses.
> >
> > —
> > Reply to this email directly, view it on GitHub <
> >
#33 (comment)>
> > , or unsubscribe <
> >
>
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you commented. <
> >
>
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif
> >
> > Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#33 (comment) <
#33 (comment) >
> >,
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***> >
> >
>
>
>
> —
> Reply to this email directly, view it on GitHub <
> #33 (comment)>
> , or unsubscribe <
>
https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you commented. <
>
https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif
>
> Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***> ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#33 (comment) <#33 (comment)>
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A2NHSG3ERO3VXNU4AARUFNLV36O3FANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
>
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQNOUWIDNOOR25JZCHDV36WADANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQL4D52N6WPUZN6O25DV36WADA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQMO4I.gif>
Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***> > >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG2RTQV5P6ZIGOEN32DV367WFANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.*** <mailto:***@***.***> >
—
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQICDXQZZTHZLLVRR4LV37G7JANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AYOYVQN2U5RFTUUXPSUYTWDV37G7JA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQT4TS.gif> Message ID: ***@***.*** ***@***.***> >
from slinger.
sp222222
commented on July 28, 2024
if we need a thumb drive installed on the parents router then I’ll need to
postpone this ssh meeting. Not sure they have one but I’ll check. I have
some to give them this weekend if need be
…On Wed, Aug 31, 2022 at 5:51 PM GerryDazoo ***@***.***> wrote:
OK, sounds like a plan.
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 5:45 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
I should be home by 1pm ET tomorrow if you can start then. I fixed the port
issue on 500 using 3.07. I guess the default 500 port is 5213 mine was
forced to 5224 but simple changes to router fixed it. I could not get into
slingbox setuo though which makes me leary on buying another one on ebay.
We can attempt the ssh stuff tomorrow. I put the public key on parents
router and have both files ready to go. public and private key files.
Call me afternoon
Thanks
On Wed, Aug 31, 2022 at 4:43 PM GerryDazoo ***@***.*** <mailto:***@***.***>
> wrote:
> Sure we can do that. What time did you have in mind? Aren’t you working
> days?
>
>
>
> * Gerry
>
>
>
> From: sp222222 ***@***.*** <mailto:***@***.***> >
> Sent: Wednesday, August 31, 2022 3:21 PM
> To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
> Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.***
<mailto:***@***.***> >
> Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> connect again (Issue #33)
>
>
>
> GerryDazoo/Slinger:
>
> Can we schedule a time tomorrow afternoon to guide me through these
> commands? Am I using putty remotely
> to get into my parent’s router? And also my stumble with my 500 since
> switching routers. I will try the slingsetup from Dish (owners) and see
> if that works. I don’t see why my other two solos went fine once I took
> them iut of dhcp pool and gave them same static IP and port they had
> before, hit quickly button on the back and they both started working
again.
>
>
> On Wed, Aug 31, 2022 at 2:19 PM GerryDazoo ***@***.*** <mailto:***@***.***>
<mailto:***@***.***>
> > wrote:
>
> > Sorry Mike that was meant for someone else.
> >
> >
> >
> > From: sp222222 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> > Sent: Wednesday, August 31, 2022 2:04 PM
> > To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
>
> > Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
>; Comment ***@***.*** <mailto:***@***.***>
> <mailto:***@***.***> >
> > Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> > connect again (Issue #33)
> >
> >
> >
> > that’s what I posted on the github issue
> >
> > On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***>
<mailto:***@***.***>
> <mailto:***@***.***>
> > > wrote:
> >
> > > Can you send the startup output from the server. This will help in
> > > figuring out what’s happening.
> > >
> > >
> > >
> > > From: tom76017 ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***> >
> > > Sent: Wednesday, August 31, 2022 9:01 AM
> > > To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> >
> > > Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> >; Comment ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> > <mailto:***@***.***> >
> > > Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> > > connect again (Issue #33)
> > >
> > >
> > >
> > > I force all servers on my LAN to have a fixed local IP address, I do
> this
> > > in my routers DHCP. When I upgrade my router, I have to resetup the
> > manual
> > > DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
> > > static addresses.
> > >
> > > —
> > > Reply to this email directly, view it on GitHub <
> > >
> #33 (comment)>
> > > , or unsubscribe <
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU
> > >
> > > .
> > > You are receiving this because you commented. <
> > >
> >
>
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif
> > >
> > > Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:
***@***.***>
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> #33 (comment)
<
> #33 (comment)
>
> > >,
> > > or unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU
> > >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
>
> > >
> >
> >
> >
> > —
> > Reply to this email directly, view it on GitHub <
> >
#33 (comment)>
> > , or unsubscribe <
> >
>
https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you commented. <
> >
>
https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif
> >
> > Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#33 (comment) <
#33 (comment) >
> >,
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/A2NHSG3ERO3VXNU4AARUFNLV36O3FANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> >
>
>
>
> —
> Reply to this email directly, view it on GitHub <
> #33 (comment)>
> , or unsubscribe <
>
https://github.com/notifications/unsubscribe-auth/AYOYVQNOUWIDNOOR25JZCHDV36WADANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you commented. <
>
https://github.com/notifications/beacon/AYOYVQL4D52N6WPUZN6O25DV36WADA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQMO4I.gif
>
> Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#33 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A2NHSG2RTQV5P6ZIGOEN32DV367WFANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.*** <mailto:***@***.***> >
>
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQICDXQZZTHZLLVRR4LV37G7JANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQN2U5RFTUUXPSUYTWDV37G7JA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQT4TS.gif>
Message ID: ***@***.*** ***@***.***> >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG3BR7B42VLSISXSRFTV37HUTANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from slinger.
sp222222
commented on July 28, 2024
they still have the brand new one I gave them. it is now in top slot on
their router
…On Wed, Aug 31, 2022 at 5:51 PM GerryDazoo ***@***.***> wrote:
OK, sounds like a plan.
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 5:45 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
I should be home by 1pm ET tomorrow if you can start then. I fixed the port
issue on 500 using 3.07. I guess the default 500 port is 5213 mine was
forced to 5224 but simple changes to router fixed it. I could not get into
slingbox setuo though which makes me leary on buying another one on ebay.
We can attempt the ssh stuff tomorrow. I put the public key on parents
router and have both files ready to go. public and private key files.
Call me afternoon
Thanks
On Wed, Aug 31, 2022 at 4:43 PM GerryDazoo ***@***.*** <mailto:***@***.***>
> wrote:
> Sure we can do that. What time did you have in mind? Aren’t you working
> days?
>
>
>
> * Gerry
>
>
>
> From: sp222222 ***@***.*** <mailto:***@***.***> >
> Sent: Wednesday, August 31, 2022 3:21 PM
> To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
> Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.***
<mailto:***@***.***> >
> Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> connect again (Issue #33)
>
>
>
> GerryDazoo/Slinger:
>
> Can we schedule a time tomorrow afternoon to guide me through these
> commands? Am I using putty remotely
> to get into my parent’s router? And also my stumble with my 500 since
> switching routers. I will try the slingsetup from Dish (owners) and see
> if that works. I don’t see why my other two solos went fine once I took
> them iut of dhcp pool and gave them same static IP and port they had
> before, hit quickly button on the back and they both started working
again.
>
>
> On Wed, Aug 31, 2022 at 2:19 PM GerryDazoo ***@***.*** <mailto:***@***.***>
<mailto:***@***.***>
> > wrote:
>
> > Sorry Mike that was meant for someone else.
> >
> >
> >
> > From: sp222222 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> > Sent: Wednesday, August 31, 2022 2:04 PM
> > To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
>
> > Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
>; Comment ***@***.*** <mailto:***@***.***>
> <mailto:***@***.***> >
> > Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> > connect again (Issue #33)
> >
> >
> >
> > that’s what I posted on the github issue
> >
> > On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***>
<mailto:***@***.***>
> <mailto:***@***.***>
> > > wrote:
> >
> > > Can you send the startup output from the server. This will help in
> > > figuring out what’s happening.
> > >
> > >
> > >
> > > From: tom76017 ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***> >
> > > Sent: Wednesday, August 31, 2022 9:01 AM
> > > To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> >
> > > Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> >; Comment ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> > <mailto:***@***.***> >
> > > Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> > > connect again (Issue #33)
> > >
> > >
> > >
> > > I force all servers on my LAN to have a fixed local IP address, I do
> this
> > > in my routers DHCP. When I upgrade my router, I have to resetup the
> > manual
> > > DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
> > > static addresses.
> > >
> > > —
> > > Reply to this email directly, view it on GitHub <
> > >
> #33 (comment)>
> > > , or unsubscribe <
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU
> > >
> > > .
> > > You are receiving this because you commented. <
> > >
> >
>
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif
> > >
> > > Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:
***@***.***>
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> #33 (comment)
<
> #33 (comment)
>
> > >,
> > > or unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU
> > >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
>
> > >
> >
> >
> >
> > —
> > Reply to this email directly, view it on GitHub <
> >
#33 (comment)>
> > , or unsubscribe <
> >
>
https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you commented. <
> >
>
https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif
> >
> > Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#33 (comment) <
#33 (comment) >
> >,
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/A2NHSG3ERO3VXNU4AARUFNLV36O3FANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> >
>
>
>
> —
> Reply to this email directly, view it on GitHub <
> #33 (comment)>
> , or unsubscribe <
>
https://github.com/notifications/unsubscribe-auth/AYOYVQNOUWIDNOOR25JZCHDV36WADANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you commented. <
>
https://github.com/notifications/beacon/AYOYVQL4D52N6WPUZN6O25DV36WADA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQMO4I.gif
>
> Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#33 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A2NHSG2RTQV5P6ZIGOEN32DV367WFANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.*** <mailto:***@***.***> >
>
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQICDXQZZTHZLLVRR4LV37G7JANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQN2U5RFTUUXPSUYTWDV37G7JA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQT4TS.gif>
Message ID: ***@***.*** ***@***.***> >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG3BR7B42VLSISXSRFTV37HUTANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from slinger.
GerryDazoo
commented on July 28, 2024
FYI, your parent’s router needs the private key. Not the public.
From: Gerry Dubois ***@***.***>
Sent: Wednesday, August 31, 2022 5:51 PM
To: 'GerryDazoo/Slinger' ***@***.***>; 'GerryDazoo/Slinger' ***@***.***>
Cc: 'Comment' ***@***.***>
Subject: RE: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
OK, sounds like a plan.
From: sp222222 ***@***.*** ***@***.***> >
Sent: Wednesday, August 31, 2022 5:45 PM
To: GerryDazoo/Slinger ***@***.*** ***@***.***> >
Cc: GerryDazoo ***@***.*** ***@***.***> >; Comment ***@***.*** ***@***.***> >
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
I should be home by 1pm ET tomorrow if you can start then. I fixed the port
issue on 500 using 3.07. I guess the default 500 port is 5213 mine was
forced to 5224 but simple changes to router fixed it. I could not get into
slingbox setuo though which makes me leary on buying another one on ebay.
We can attempt the ssh stuff tomorrow. I put the public key on parents
router and have both files ready to go. public and private key files.
Call me afternoon
Thanks
On Wed, Aug 31, 2022 at 4:43 PM GerryDazoo ***@***.*** <mailto:***@***.***> > wrote:
Sure we can do that. What time did you have in mind? Aren’t you working
days?
* Gerry
From: sp222222 ***@***.*** <mailto:***@***.***> >
Sent: Wednesday, August 31, 2022 3:21 PM
To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
Cc: GerryDazoo ***@***.*** <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***> >
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
connect again (Issue #33)
GerryDazoo/Slinger:
Can we schedule a time tomorrow afternoon to guide me through these
commands? Am I using putty remotely
to get into my parent’s router? And also my stumble with my 500 since
switching routers. I will try the slingsetup from Dish (owners) and see
if that works. I don’t see why my other two solos went fine once I took
them iut of dhcp pool and gave them same static IP and port they had
before, hit quickly button on the back and they both started working again.
On Wed, Aug 31, 2022 at 2:19 PM GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> wrote:
> Sorry Mike that was meant for someone else.
>
>
>
> From: sp222222 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> Sent: Wednesday, August 31, 2022 2:04 PM
> To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
> Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >; Comment ***@***.*** <mailto:***@***.***>
<mailto:***@***.***> >
> Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> connect again (Issue #33)
>
>
>
> that’s what I posted on the github issue
>
> On Wed, Aug 31, 2022 at 2:02 PM GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
<mailto:***@***.***>
> > wrote:
>
> > Can you send the startup output from the server. This will help in
> > figuring out what’s happening.
> >
> >
> >
> > From: tom76017 ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***> >
> > Sent: Wednesday, August 31, 2022 9:01 AM
> > To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
>
> > Cc: GerryDazoo ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
>; Comment ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> <mailto:***@***.***> >
> > Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't
> > connect again (Issue #33)
> >
> >
> >
> > I force all servers on my LAN to have a fixed local IP address, I do
this
> > in my routers DHCP. When I upgrade my router, I have to resetup the
> manual
> > DHCP addresses. So both my Slingbox and video source (TiVo Mini) have
> > static addresses.
> >
> > —
> > Reply to this email directly, view it on GitHub <
> >
#33 (comment)>
> > , or unsubscribe <
> >
>
https://github.com/notifications/unsubscribe-auth/AYOYVQIYQ4URN47GZWZ42CLV35JQXANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you commented. <
> >
>
https://github.com/notifications/beacon/AYOYVQNVVUTRMAC3MRZPK4TV35JQXA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPSWR2.gif
> >
> > Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#33 (comment) <
#33 (comment) >
> >,
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/A2NHSG5LYEJUPO4S4ERGJILV36M3LANCNFSM6AAAAAAQBCG6UU
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.*** <mailto:***@***.***> <mailto:***@***.***> <mailto:***@***.***> >
> >
>
>
>
> —
> Reply to this email directly, view it on GitHub <
> #33 (comment)>
> , or unsubscribe <
>
https://github.com/notifications/unsubscribe-auth/AYOYVQLSSGVEFZLKFJDZBYTV36M7ZANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you commented. <
>
https://github.com/notifications/beacon/AYOYVQOCH6NWB7KUVETV3UTV36M7ZA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQHWNM.gif
>
> Message ID: ***@***.*** <mailto:***@***.***> <mailto:***@***.***> ***@***.*** <mailto:***@***.***> <mailto:***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#33 (comment) <#33 (comment)>
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A2NHSG3ERO3VXNU4AARUFNLV36O3FANCNFSM6AAAAAAQBCG6UU
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.*** <mailto:***@***.***> <mailto:***@***.***> >
>
—
Reply to this email directly, view it on GitHub <
#33 (comment)>
, or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQNOUWIDNOOR25JZCHDV36WADANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you commented. <
https://github.com/notifications/beacon/AYOYVQL4D52N6WPUZN6O25DV36WADA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQMO4I.gif>
Message ID: ***@***.*** <mailto:***@***.***> ***@***.*** <mailto:***@***.***> > >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG2RTQV5P6ZIGOEN32DV367WFANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.*** <mailto:***@***.***> >
—
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQICDXQZZTHZLLVRR4LV37G7JANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AYOYVQN2U5RFTUUXPSUYTWDV37G7JA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJQT4TS.gif> Message ID: ***@***.*** ***@***.***> >
from slinger.
sp222222
commented on July 28, 2024
Gerry,
If I end up replacing my PR soon, will we have to jump through the same
hoops? Or will mounting the same usb into the replacement router do the
trick? I fear that thing won’t last long.
from slinger.
GerryDazoo
commented on July 28, 2024
Unfortunately, there will be hoops.
You’ll need to setup the configuration to tell PR (ASUS) to run your ssh script when it detects the USB stick and put a copy of the script in the /jffs file system.
Good news is we already have this working so the second time around it should be mush easier. 😊
* Gerry
From: sp222222 ***@***.***>
Sent: Monday, October 10, 2022 7:40 PM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; State change ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
Gerry,
If I end up replacing my PR soon, will we have to jump through the same
hoops? Or will mounting the same usb into the replacement router do the
trick? I fear that thing won’t last long.
—
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQI5KA4QJUFIYQUOYVDWCSLM3ANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you modified the open/close state. <https://github.com/notifications/beacon/AYOYVQIZIHNT4ETBSPXA6C3WCSLM3A5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSL5XPZM.gif> Message ID: ***@***.*** ***@***.***> >
from slinger.
GerryDazoo
commented on July 28, 2024
Can you turn up the slingbox desktop and have it probe for boxes on your network. Basically the same thing my code does but you won’t have to install the netifaces modules.
From: sp222222 ***@***.***>
Sent: Wednesday, August 31, 2022 9:59 AM
To: GerryDazoo/Slinger ***@***.***>
Cc: GerryDazoo ***@***.***>; Comment ***@***.***>
Subject: Re: [GerryDazoo/Slinger] new router , same files - 500 won't connect again (Issue #33)
I gave it static IP and gave it same port IP it had before on the old
router.
pip netifaces will resolve it? funny the remote page works but not the
sling500 itself
On Wed, Aug 31, 2022 at 7:20 AM GerryDazoo ***@***.*** <mailto:***@***.***> > wrote:
The IP address/port for your Slingbox has changed.
“Error connecting to ('192.168.1.88', 5224)”
When that happens and it can’t find the slingbox it tries to probe for it
on the network like the Sling code does. But you are missing a python
module that’s needed to do the probing (“netifaces’). You should be able to
install that with PIP or you can run the sling code and get the new IP/port.
* Gerry
From: sp222222 ***@***.*** <mailto:***@***.***> >
Sent: Wednesday, August 31, 2022 2:48 AM
To: GerryDazoo/Slinger ***@***.*** <mailto:***@***.***> >
Cc: Subscribed ***@***.*** <mailto:***@***.***> >
Subject: [GerryDazoo/Slinger] new router , same files - 500 won't connect
again (Issue #33)
500 works fine with normal paid app
I get this running python. only thing changed is my router....
S:\S2022\SLING VLC\SLING VLC\ST500_2022>ss.py config.ini
Version : 3.07 Running on Windows-7-6.1.7601-SP1 pid= 9832
Using config file config.ini
Connection Manager Running on port 5960 with 10 max streams....
Streamer Running: 10 config.ini 5960
starting up on port 5960
Checking for slingbox at ('192.168.1.88', 5224)
Reading Custom Remote definition from S:\S2022\SLING VLC\SLING VLC
mote_500.txt
* Serving Flask app 'ss'
* Debug mode: off
WARNING: This is a development server. Do not use it in a productio
Use a production WSGI server instead.
* Running on all addresses (0.0.0.0)
* Running on http://127.0.0.1:5961/
* Running on http://192.168.1.8:5961/
Press CTRL+C to quit
Error connecting to ('192.168.1.88', 5224)
Exception in thread Thread-2:
Traceback (most recent call last):
File "C:\Program Files\Python38\lib\threading.py", line 932, in _
er
self.run()
File "C:\Program Files\Python38\lib\threading.py", line 870, in r
self._target(*self._args, **self._kwargs)
File "S:\S2022\SLING VLC\SLING VLC\ST500_2022\ss.py", line 527, i
boxes = find_slingbox_info()
File "S:\S2022\SLING VLC\SLING VLC\ST500_2022\ss.py", line 78, in
x_info
import netifaces
ModuleNotFoundError: No module named 'netifaces'
08/31/2022, 02:33:01 RemoteControl connection from ('192.168.1.8'
Starting remote control stream handler for ('192.168.1.8', 56592)
Remote Control Connected
Remote Code: 2 0x0 0x0 0x2
Button Clicked ImmutableMultiDict([('Power', '1'), ('Digits', '')])
—
Reply to this email directly, view it on GitHub <
#33> , or unsubscribe <
https://github.com/notifications/unsubscribe-auth/AYOYVQMRKITBHDJUD7JE3QLV3352TANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you are subscribed to this thread. <
https://github.com/notifications/beacon/AYOYVQO2E4RVYZEHG3MSTTTV3352TA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNFJFZXG5LFVJRW63LNMVXHIX3JMTHFBYCEPY.gif>
Message ID: ***@***.*** <mailto:***@***.***> >
—
Reply to this email directly, view it on GitHub
<#33 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2NHSG3NKOOH3O3UDGOOC6TV345XHANCNFSM6AAAAAAQBCG6UU>
.
You are receiving this because you authored the thread.Message ID:
***@***.*** <mailto:***@***.***> >
—
Reply to this email directly, view it on GitHub <#33 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYOYVQKDURTU5NZQJMVGUWDV35QJJANCNFSM6AAAAAAQBCG6UU> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AYOYVQPQU6URJOOMVYNHNLLV35QJJA5CNFSM6AAAAAAQBCG6UWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSJPW52Q.gif> Message ID: ***@***.*** ***@***.***> >
from slinger.
Related Issues (20)
- Slingbox device adminpassword recovery HOT 2
- sb500 random streaming freezes on mac vlc player HOT 1
- Issue streaming SB500 after upgrade to 4.0 HOT 3
- New FIOS html remote HOT 2
- SlingerPlayer 4.0 not ready for prime time HOT 17
- Ist es möglich Slingbox Server auch auf einem NAS zu Installieren? HOT 1
- Always show login return session startup failed error...
- Custom remote ProHD_Tuner.txt channel number button doesn't work HOT 1
- what to set videosource= for 240 AV, I get Slingbox returned error trying to set video parameters thx HOT 3
- Issues after updating to 4.0 (I think) HOT 5
- Debian upgrade to 12 error HOT 1
- SB220-100 what is sbtype?
- Slingbox Pro factory reset , error when connecting HOT 3
- Regression: v4.0: Rounded corners on remote buttons no longer render properly HOT 2
- v4.0+: Slingbox status no longer shows at bottom of "Remote" web page. HOT 1
- Duplicate/repeat command sent when remote page is left open and reloaded
- Internal Server Error when using nginx proxy manager HOT 3
- video plays for 1 sec, frame freezes. audio continues playing fine HOT 1
- Installation issue with current repository structure HOT 2
- Slingbox 500 has stopped working HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from slinger.