Distance Calculator - Radius / Diameter not updating properly about distance-direction-addin-dotnet

[mfunk]

@pshowalter But isn't 28 Minutes ~= 0.4666667 Hours (e.g. 28 / 60), and therefore no change to the distance travelled?

[pshowalter]

Yes, but you would go quite a bit farther than 1,680 meters in that time, at that rate (60 nm/hr).

[pshowalter]

Testing with updates checked in today.
Open Distance Calculator
Click Center Point
Enter Time: 1 Minute
Enter Rate: 5280 Feet
click enter

Tool uses the units currently set in Radius / Diameter (in this case it was Kilometers, the default is Meters) to create a 5280 km circle.

If user tries to change the Radius / Diameter units from Kilometers to Feet, the value in the Radius / Diameter input is converted from 5280 Kilometers to 17,322,835 feet.

[jmccausland]

@pshowalter please re-test this to see if this is still an issue. Keep in mind that we have not separated the rate time unit from the time input.

[pshowalter]

Mostly working as designed.

• Changing Rate Units causes update to Radius / Diameter
• Changing Radius / Diameter units causes update to Radius / Diameter
• However, changing Time units, does not cause an update to Radius / Diameter
• Need answer to your question - "Do we want the Rate choices to be "Feet / sec" or "Feet" then another drop down for "sec", "hour", etc?" on Issue: #65 (comment) (your question should be the "issue" now).