Comments (2)
Issue fixed ! Please read the following:
Set TinySA Ultra as Real Time Spectroscope for Station:
Proceed as following step by step:
- launch device on it's default setting,
- go to "Marker" > select "Modify markers" > disable "tracking",
- go to "Marker Options" > select "Center",
- go to "Frequency" & perform the following:
- select "center" & enter center frequency of station (124.487 Khz for ICOM7100), then "Back" to "Frequency",
- "Frequency" > select "Span" & enter 200 KHz,
- leave "RBW" on "Auto" as it & never change it.
- go to "Display" > select "Sweep accuracy" & perform the following:
- select "Fast",
- set "Speedup at 4,
- then "Back",
- select "Sweep points" & set it at 201
- go to "Storage" > press on "Save setting"
- connect "RF" port of device to "IF output" port of station,
- enjoy real time spectroscope !
Important Notes:
A) you should never perform step (5) before steps (2), (3), & (4). Otherwise "Central Marker" will never be exactly equal to "Center Frequency" & will be slight shift from it. While performing step (5) after steps (1), (2), (3) & (4) in sequence will guarantee that "Center Marker" will exactly equal to center frequency of station & by this way will point constantly be at middle of screen of device pointing exactly to real frequency that you tune you station on it.
B) leave default state (only one marker, marker 1)
C) in "Trace" > "Trace 1", leave "Clac" at it's default state (OFF) or change it to "Quasi Peak". Otherwise speed of analyzer will be slow .... "OFF" state may be useful if your shack in a town or other environment where QRM is absent or low, while "Quasi Peak" is more useful where QRM is harsh. "Quasi Peak" is even able to show on screen the weak signal that you can not hear due to QSB attacks ....
Please look for attached video by me in the following link (my review on Alibaba.com - see "Buyer review" section in link):
https://www.alibaba.com/product-detail/ULTRA-100k-5-3GHz-3-95_1600697601084.html
I tested it on CW, SSB (LSB & USB) & AM modes & it worked !
YI1YJK
Regards.
from tinysa.
I have to confess my wrong now ! Yesterday, I spent 3 hrs from monitoring of tiny spectrum analyzer Ultra to compare between:
- CALC OFF
- AVER 4
- QUASI PEAK
Really "Quasi Peak" is the best option ! It was, in fact, slopping of care that mislead me !
- 1st of all, "Quasi Peak" not slower than "Calc OFF" at all.
- 2nd thing, it remove noise background & make useful signal more prominent.
- More importantly, I noticed that "Qausi Peak" is able to detect weak signal that CAN NOT HEAR !
I discovered 3rd point while QSB attacks happened during listening QSO on 40, 20, & 15 mb. When one of 2 operator has weaker signal but still could be heard without QSB, when QSB happened I was unable to listen to him but it's signal appearing on the spectrum screen ! Then, after more observation, I noticed while I monitored QSO that I listened to only one operator, I noticed signal appearing after he stopped as if 2nd operator replied him. Then when propagation improved temporarily, I could copied voice of 2nd operator that I suspected him from curve of analyzer !
"CALC OFF" is useful if your shack in a town or other quit environment with no or minimum QRM. But, if you - like me - live in harsh QRM environment like a vertical building then "Quasi Peak" should be your choice.
I edited my previous 2nd post to be compatible with this post.
I think it is now the time to close this issue. But, I would like from developer to pay more attention in future update to improve this feature (real time spectroscope monitoring) but remove slowing. At current stage, enabling waterfall make unwanted slowing, something of annoying bother .....
from tinysa.
Related Issues (20)
- tinySA4 build for v1.4-46-g94410c0 gives error HOT 1
- Negative value in NF measurement HOT 4
- tinySA3: touch unresponsible since 876d347 HOT 1
- tinySA3: BIG NUMBER graph is displayed in the size of big WATERFALL HOT 1
- Recording the trace on the sd card. HOT 3
- firmware HOT 2
- 3 mode options disappeared HOT 1
- Problem measuring traces in dbuv
- "Half-bricked" TinySA Ultra HOT 3
- Questions
- Buggy firmware when compiling with GCC-ARM version 12 HOT 3
- BUG: No possibility to interrupt long running serial commands, e.g. scanraw HOT 2
- Faulty SD Read / Write HOT 4
- [Feature request] Add software "Noise filter" without additional slowing of TinySA Ultra HOT 2
- My Tiny SA the screen comes on but is not changing to program mode. It stays a blue light up screen. HOT 1
- Hang up, noise floor line disappear HOT 1
- Steps in spectrum at low freq. HOT 1
- Convert TinySA csvs to WWB HOT 1
- Bad buying link on website HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from tinysa.