Comments (4)
Hello, the repository seems working now. Could you check again?
Please note that the source I am using is slightly different:
deb http://hwraid.le-vert.net/debian bullseye main
from hwraid.
Good to know. I am not sure about who could close this issue. Maybe you?
from hwraid.
Sorry for the late reply, I have been waiting on parts and time.
Great news! I just installed the 2 packages fine thankyou!!!
Also this is on Debian12 and as of Jan 2024 works OK,
root@bigxeon:~# megacli -LDInfo -L0 -a0
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 237.968 GB
Sector Size : 512
Mirror Data : 237.968 GB
State : Optimal
Strip Size : 64 KB
Number Of Drives : 2
Span Depth : 1
Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Disk's Default
Encryption Type : None
Is VD Cached: No
Exit Code: 0x00
root@bigxeon:# megaclisas-status# apt -y install megaclisas-status --allow-unauthenticated
-bash: megaclisas-status: command not found
root@bigxeon:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
daemon
The following NEW packages will be installed:
daemon megaclisas-status
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 106 kB of archives.
After this operation, 318 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bookworm/main amd64 daemon amd64 0.8-1+b1 [92.2 kB]
Get:2 http://hwraid.le-vert.net/debian bullseye/main amd64 megaclisas-status all 0.18+Debian.11.bullseye [14.2 kB]
Fetched 106 kB in 1s (123 kB/s)
Selecting previously unselected package daemon.
(Reading database ... 169778 files and directories currently installed.)
Preparing to unpack .../daemon_0.8-1+b1_amd64.deb ...
Unpacking daemon (0.8-1+b1) ...
Selecting previously unselected package megaclisas-status.
Preparing to unpack .../megaclisas-status_0.18+Debian.11.bullseye_all.deb ...
Unpacking megaclisas-status (0.18+Debian.11.bullseye) ...
Setting up daemon (0.8-1+b1) ...
Setting up megaclisas-status (0.18+Debian.11.bullseye) ...
Processing triggers for man-db (2.11.2-2) ...
root@bigxeon:~# megaclisas-status
-- Controller information --
-- ID | H/W Model | RAM | Temp | BBU | Firmware
c0 | LSI MegaRAID SAS 9272-8i | 512MB | 51C | Absent | FW: 23.2.1-0065
-- Array information --
-- ID | Type | Size | Strpsz | Flags | DskCache | Status | OS Path | CacheCade |InProgress
c0u0 | RAID-1 | 238G | 64 KB | RA,WT | Default | Optimal | /dev/sda | None |None
-- Disk information --
-- ID | Type | Drive Model | Size | Status | Speed | Temp | Slot ID | LSI ID
c0u0p0 | SSD | S14VNYAD200058SAMSUNG SSD PM841 2.5" 7mm 256GB DXT03D0Q | 237.9 Gb | Online, Spun Up | 6.0Gb/s | 31C | [252:0] | 13
c0u0p1 | SSD | S0NUNEAB911373SAMSUNG SSD PM810 2.5" 7mm 256GB AXM08D1Q | 237.9 Gb | Online, Spun Up | 3.0Gb/s | N/A | [252:1] | 18
root@bigxeon:~#
from hwraid.
Thankyou works fine as shown
from hwraid.
Related Issues (20)
- Repository for Debian bullseye HOT 10
- Debian package versions: stretch beats buster HOT 3
- UnicodeDecodeError: 'utf-8' codec can't decode bytes in position 146-147: invalid continuation byte HOT 5
- https://hwraid.le-vert.net/debian/hwraid.le-vert.net.gpg.key expired HOT 4
- Missing packages - Debian 11 (bullseye) HOT 8
- LSI/Dell PERC H750 compatibility HOT 2
- LSI 3916 megaraid_sas problem HOT 2
- megaclisas-status difficulty processing megacli output HOT 1
- Ubuntu 22.04 Support
- Apt Warns HOT 1
- megacli and megaclisas-status kill conttroller's FW HOT 16
- Error opening terminal: xterm?
- Repository for Debian Bookworm HOT 12
- slight mishap
- H700 bricked (Dell T710) HOT 1
- Missing packages - Debian 12 (bookworm) HOT 10
- megagli not working completely on debian 12 (Segmentation fault)
- hpacucli is not available for bullseye but the package from buster works
- SyntaxWarning: invalid escape sequence '\(' HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from hwraid.