ESP Record voice by vs1053 about esp-radio

[Edzelf]

I did some experimenting with recording (ogg-format). Not with the best results.... You can examine my code on http://smallenburg.nl/Ogg-encoder.zip.
Note that you have to supply a file for your WiFi SSID containing the password, for example SSID.pw.

[fredericplante]

At line 18, you specifies "Pin to program". What does that mean? What is hooked on those pins?

[Edzelf]

It is the pinnumber that you use in the sketch to address the pin. Note the issue I mentioned at the top of the Ogg-encoder sketch: "Sometimes the conversion will not start"....
GPIO[0] and GPIO[1] are being set to LOW in the sketch.

[fredericplante]

So it basically, it's the same pin out then the Radio-player, except for Xrst that is set to pin 3, instead of the reset pin of the ESP8266.

[Edzelf]

Could be, this is a different project, so the pin configuration and software will differ.

[fredericplante]

Before I buy another VS1053, tel me will this broadcaster project, the zip file you just sent, and the radio project connect and play along together?

[Edzelf]

Yes, I had it working for a while. But it was not very reliable. I think it will be a challenge to get it working.

[fredericplante]

Well ok then, it will be part of my late xMass shopping. Thank you Ed