Coder Social home page Coder Social logo

Comments (4)

dualra1n avatar dualra1n commented on June 1, 2024 2

I'm trying to downgrade iPhone 7 to 14.8

futurerestore completes successfully, but when I run ./downr1n.sh --boot I get this:


[*] Pwning device

usb_timeout: 5

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: RESET

ret: true

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: SPRAY

ret: true

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: SETUP

ret: true

...

There are hundreds of [IOKit] Waiting for the USB handle... lines.

Additionally, while executing device cyclically appears and disappears in Finder. It doesn't react to button combinations at all, so I can't re-enter DFU or perform force restart.

I used ./palera1n --dfuhelper to exit DFU, it just prints <Info>: Waiting for devices, finishes and nothing happens.

Sometimes it shows <Error>: libirecovery error: -3 (Unable to connect to device).

I tried to downgrade multiple times, run ./downr1n.sh --boot on another PC with Linux - behaviour the same. However, in this state, I can restore and update device using Finder.

First: execute sudo ./binaries/$(uname)/gaster pwn, if that start to loop (like never finish) Force reboot when the loop stop please press home button (or volume down) and stop gaster by pressing ctrl + c in your computer and after 10 second execute the command again. Remember before you run --boot you must be sure that you are in the real dfu mode

from downr1n.

inkhog avatar inkhog commented on June 1, 2024 1

it fits me well. very nice of you

from downr1n.

whoeevee avatar whoeevee commented on June 1, 2024

I'm trying to downgrade iPhone 7 to 14.8
futurerestore completes successfully, but when I run ./downr1n.sh --boot I get this:


[*] Pwning device

usb_timeout: 5

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: RESET

ret: true

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: SPRAY

ret: true

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: SETUP

ret: true

...

There are hundreds of [IOKit] Waiting for the USB handle... lines.
Additionally, while executing device cyclically appears and disappears in Finder. It doesn't react to button combinations at all, so I can't re-enter DFU or perform force restart.
I used ./palera1n --dfuhelper to exit DFU, it just prints <Info>: Waiting for devices, finishes and nothing happens.
Sometimes it shows <Error>: libirecovery error: -3 (Unable to connect to device).
I tried to downgrade multiple times, run ./downr1n.sh --boot on another PC with Linux - behaviour the same. However, in this state, I can restore and update device using Finder.

First: execute sudo ./binaries/$(uname)/gaster pwn, if that start to loop (like never finish) Force reboot when the loop stop please press home button (or volume down) and stop gaster by pressing ctrl + c in your computer and after 10 second execute the command again. Remember before you run --boot you must be sure that you are in the real dfu mode

It works. Thanks!

from downr1n.

edwin170 avatar edwin170 commented on June 1, 2024

I'm trying to downgrade iPhone 7 to 14.8
futurerestore completes successfully, but when I run ./downr1n.sh --boot I get this:


[*] Pwning device

usb_timeout: 5

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: RESET

ret: true

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: SPRAY

ret: true

[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227

CPID: 0x8010

Found the USB handle.

Stage: SETUP

ret: true

...

There are hundreds of [IOKit] Waiting for the USB handle... lines.
Additionally, while executing device cyclically appears and disappears in Finder. It doesn't react to button combinations at all, so I can't re-enter DFU or perform force restart.
I used ./palera1n --dfuhelper to exit DFU, it just prints <Info>: Waiting for devices, finishes and nothing happens.
Sometimes it shows <Error>: libirecovery error: -3 (Unable to connect to device).
I tried to downgrade multiple times, run ./downr1n.sh --boot on another PC with Linux - behaviour the same. However, in this state, I can restore and update device using Finder.

First: execute sudo ./binaries/$(uname)/gaster pwn, if that start to loop (like never finish) Force reboot when the loop stop please press home button (or volume down) and stop gaster by pressing ctrl + c in your computer and after 10 second execute the command again. Remember before you run --boot you must be sure that you are in the real dfu mode

It works. Thanks!

that's cool :)

from downr1n.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.