GPS PPS pin about lora

[dragino]

Yes, The PSS pin is now connected to the LED and a pin header. it is not connected to the HAT now.

[Romeo-Golf]

Thanks, would it be possible to have this either directly connected to one of the gpio pins or with a jumper to enable this is used for the GPS Rx/Tx?

It seems that a number of tutorials about using Raspberry Pi with GPS to feed NTP where the PPS pin has been connected to GPIO pin 18 (physical pin 12) so could it be worthwhile using that pin for maximum compatibility?

[dragino]

Hi, Romeo, Thanks for this info. we will also add this feature. Can you point me the link so we can have a test on it? Best Regards, Edwin 发件人: Romeo-Golf [mailto:[email protected]] 发送时间: 2017年1月5日 8:28 收件人: dragino/Lora 抄送: edwin; Comment 主题: Re: [dragino/Lora] GPS PPS pin (#2) Thanks, would it be possible to have this either directly connected to one of the gpio pins or with a jumper to enable this is used for the GPS Rx/Tx? It seems that a number of tutorials about using Raspberry Pi with GPS to feed NTP where the PPS pin has been connected to GPIO pin 18 (physical pin 12) so could it be worthwhile using that pin for maximum compatibility? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#2 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AAnz1n8zwW87LNkFvgTt7_OUuiIKTNVTks5rPDj5gaJpZM4LUhkM> .说明: 图像已被发件人删除。