update interval about z03mmc

[devbis]

1. The default reporting behavior is fixed in ec3f46c and will be in the next release. It will notify in 10 seconds if the value changed and in 5 minutes if value change didn't change more than the limit. For temp it is 0.1º, for humidity - 0.5%.

2. I don't know how to set up reporting in ZHA, probably https://github.com/mdeweerd/zha-toolkit could help.

[GoodnessJSON]

1. The default reporting behavior is fixed in ec3f46c and will be in the next release. It will notify in 10 seconds if the value changed and in 5 minutes if value change didn't change more than the limit. For temp it is 0.1º, for humidity - 0.5%.

2. I don't know how to set up reporting in ZHA, probably https://github.com/mdeweerd/zha-toolkit could help.

Just wanted to bump on this. The current firmware chews through batteries and is making it quite uneconomical to run with Zigbee.

If this could be configurable it would go a long way to make this a long term option. Thanks so much if this is possible! Working great otherwise with Zigbee2MQTT.

[pvvx]

When setting the value to 10 seconds, the shortest interval will be 20 seconds. The multiplicity of the timer triggering for polling changes in increments of 10 seconds is manifested.

[pvvx]

The default reporting behavior is fixed in ec3f46c and will be in the next release. It will notify in 10 seconds if the value changed and in 5 minutes if value change didn't change more than the limit. For temp it is 0.1º, for humidity - 0.5%.

Does not work. Only one thing is transmitted - temperature, humidity or battery.
Reason: The same timer is used for all reports.

Вариант обработки