Add option to display clock about z03mmc

[andershagenhansen]

Is it possible to also remove the smiley/comfort indicator ?

Thanks in advance!

[cook1emr]

@devbis it worked with a newly-compiled firmware, and changed the firmware version numbers. Thanks a lot, for your support!

Hi, Is your firmware variation available anywhere? I would also like these options

[devbis]

@andershagenhansen you can compile firmware with this line commented.
https://github.com/devbis/z03mmc/blob/master/src/app_cfg.h#L189

There is currently no way to disable it in runtime

[andershagenhansen]

@andershagenhansen you can compile firmware with this line commented. https://github.com/devbis/z03mmc/blob/master/src/app_cfg.h#L189

There is currently no way to disable it in runtime

@devbis
I will try that - but how do I flash it to my already flashed Zigbee device? :-)

I don't have USB-TTL or resistor available :-)

[devbis]

You can change fw version and use local OTA for zigbee2mqtt. But in some cases it may brick you sensor (until flashing again via UART). So getting USB-UART is desirable for customizing it.

[andershagenhansen]

@devbis it worked with a newly-compiled firmware, and changed the firmware version numbers. Thanks a lot, for your support!