ZHA OTA? about z03mmc

[sneakythr0ws]

Odd, I just kept trying again and it suddenly started upgrading. 🤷‍♂️

Just to be clear, for anyone who may run into this in the future, do you need both the .zigbee file and the z03mmc.bin firmware in the ota folder?

👍 No. You need .zigbee only

[devbis]

For OTA you should use .zigbee file, it is a firmware with OTA header. It is located along with .bin file in release files

[sneakythr0ws]

For OTA you should use .zigbee file, it is a firmware with OTA header. It is located along with .bin file in release files

Thank you! It works fine via instruction

[Timmiej93]

@sneakythr0ws Did you have to do anything special? I'm trying to do the same thing, but I'm still getting the "No OTA image is available" error with the .zigbee file in my otau_directory.

[sneakythr0ws]

@sneakythr0ws Did you have to do anything special? I'm trying to do the same thing, but I'm still getting the "No OTA image is available" error with the .zigbee file in my otau_directory.

Nothing special. Did you try to reboot the system after it?

[Timmiej93]

I've tried rebooting, reloading yaml, even different otau_directorys. Could you confirm that this is (roughly) the yaml you have in your configuration file?

zha:
  zigpy_config:
    ota:
      otau_directory: /config/zigpy_ota
      ikea_provider: true

[Timmiej93]

Odd, I just kept trying again and it suddenly started upgrading. 🤷‍♂️

Just to be clear, for anyone who may run into this in the future, do you need both the .zigbee file and the z03mmc.bin firmware in the ota folder?