[FR] [6axis_dev] 6 axes broken with certain configs and G-codes. Add Sanity checks! about marlin

[DerAndere1]

Currently the configs by hobiseven are the only ones that were tested. Below I list Individual features that may work (although not all combinations). All other config settings currently should be treated as not supported yet.

• *_DRIVER_TYPE A4988
• *_DRIVER_TYPE DRV8825
• *_DRIVER_TYPE TMC5160
• LINEAR_AXES 3
• LINEAR_AXES 4
• LINEAR_AXES 5
• EXTRUDERS 0
• EXTRUDERS 1
• EXTRUDERS 2
• [DEBUG_LEVELING;], [DEBUG_PINS;]
• [dogm display (possibly not all menus work flawlessly with axes I,J,K)]
• One stepper driver per axis

Boards:

• ANET_10 // Melzi_optiboot
• RAMPS_14_EFB
• MKS Rumba32
• ALFAWISE_U20 (?)
• ALFAWISE_U30 (?)
• Teensy 3.6
• MEGATRONICS_3

The following G-codes were tested:

• G1 F500; G1 X10; G1 Y10; G1 Z10; G1 A10; G1 B10; G1 X10 Y10 Z10;
• G1 X10 Y10 Z10 I10; G1 X10 Y10 Z10 B10; G1 X10 Y10 Z10 A10 B10; G1 A10 B10;
• M17; M18; M19
• G28; G28 X; G28 Y; G28 Z; G28 A; G28 B;
• G90; G91
• M43 E1
• M92
• M111
• M114; M114 D (?)
• M119
• M140
• M280
• M400
• M206 (?)
• M500; M501; M502; M503; M504
• T0, T1

[hobiseven]

Added to the white list :
M17 M18 M85
M501