Support for Wave 2nd Gen about sensor.airthings_wave

[sverrham]

From a quick google search that looks like the wave mini, are you sure you don't have a wave mini? https://cdn2.hubspot.net/hubfs/4406702/Website/Manuals/Wave-Mini/airthings-wave-mini-manual.pdf can see in the linked user manual 29300

…

On Sun, Mar 15, 2020 at 5:26 PM Jason Lachowsky ***@***.***> wrote: Thanks. OT, but my SN is 29300xxxxx. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#23 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABDYNSNO26FHRCG254XOBIDRHT6T3ANCNFSM4KX3WUNQ> .

[dajo]

@sverrham Is there a way to determine which gen you have?

[sverrham]

Serial nr 2900xxxxx is gen one, serial 2950xxxxx is gen two.

…

On Sat, Mar 14, 2020, 20:42 Jason Lachowsky ***@***.***> wrote: @sverrham <https://github.com/sverrham> Is there a way to determine which gen you have? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#23 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABDYNSNQOWQIROKK2W4OKIDRHPMY5ANCNFSM4KX3WUNQ> .

[dajo]

Thanks. OT, but my SN is 29300xxxxx.

[rhgiter]

I have a airthings wave plus (model 2930) SN:2930xxxxx

how do I add this to my RP3+b
I have installed HACS and this is in the config
sensor:

• platform: airthings_wave
  scan_interval: 120

but iI don't see it in Known_devices or in HA ?

[MartyTremblay]

Welcome @rhgiter !

I'm going to state the obvious just because there's very little to go with.

• Have you looked at the logs?
• Devices (correction, Entities) will be named to something like sensor.98_07_xx_xx_xx_xx_radon_1day_avg
• These devices are Bluetooth LE (Low Energy) devices, their practical range between the device and the Pi is about 15 feet (line of sight).

[rhgiter]

Thanks I can see it now ,but all my entities writes available - ? [image: image.png] /René Den tor. 26. mar. 2020 kl. 13.33 skrev Martin Tremblay < [email protected]>:

…

Welcome @rhgiter <https://github.com/rhgiter> ! I'm going to state the obvious just because there's very little to go with. - Have you looked at the logs? - Devices will be named to something like sensor.98_07_xx_xx_xx_xx_radon_1day_avg - These devices are Bluetooth LE (Low Energy) devices, their practical range between the device and the Pi is about 15 feet (line of sight). — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#23 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOR4UGANNV63LE4NCOQRW3TRJNDQPANCNFSM4KX3WUNQ> .

[dajo]

OT still, but @sverrham it looks like both of us have pluses with 2930xxxxx. I kinda gave up for now as I'm definitely further than the practical range and I don't really understand how to use pip with my HA setup.

[rhgiter]

i got mine to work. but the range from PI3b+ to wave is 5 mtr and it wont work ... when its 2,5 t will :-/