Comments (18)
However, I can guarantee you that no cloud sync is involved in mobileraker at the moment, you can always check the source code here.
I believe you, cloud sync was just the first somewhat logical explanation for this behaviour.
Thanks for the quick fix, I'll try it as soon as it's available!
from mobileraker.
Interesting that none of the RC testers reported the issue. However that's why I published a beta build to the store.
I now know that it's definitely related to the migration from local to remote storage for the printer settings.
I'll see if I am able to fix the issue until tomorrow.
Thanks for the feedback guys.
I'll let you guys know once I've published a new beta release fixing the issue.
from mobileraker.
I just pushed the fix with 05e46a9.
The problem was caused by a missing catch clause, resulting in an error while trying to fetch the settings for your printer (Presets, Invert-x,y,z ....).
I'll submit the a new beta build to the playstore.
Let me know if this fixes your issues.
from mobileraker.
Hey, thanks for the feedback.
Did you upgrade or installed the app freshly?
If the first one is the case, can you test if the problem resolves by deleting the apps data and setting up the printer again?
I am pretty sure it's cause by the migration from local storage to Moonraker storage of the printer settings.
from mobileraker.
Yes, I upgraded, but also clearing the app data and setting it up again doesn't change what I get to see, the console and file viewer work but the dashboard doesn't.
from mobileraker.
Interesting 🤔
I'll take a closer look at that tomorrow.
I need to setup an older version and test if sth. is still wrong with the settings migration.
Since the settings screen is not working and the dashboard is the only screen using the printer`s setting I am sure sth. is wrong there.
from mobileraker.
I also have this problem, in addition (I don't know if it's related) I can no longer open the printer settings to add a camera for example. It shows the settings for about 3-4s and then the screen turns completely gray, as shown below:
Smartphone (please complete the following information):
Device: OnePlus 6t
OS: Android
Version: 11
from mobileraker.
I think it might be related, as I also have the same issue with the printer settings.
from mobileraker.
I just found something, that I don't know how to make sense of: When I clear the app data, the printer gets removed as expected. But if clear app data, verify in the app that I would have to re-add my printer, uninstall and reinstall, my printer is back. Is there some storage through google cloud or something?
from mobileraker.
I just found something, that I don't know how to make sense of: When I clear the app data, the printer gets removed as expected. But if clear app data, verify in the app that I would have to re-add my printer, uninstall and reinstall, my printer is back. Is there some storage through google cloud or something?
No cloud-based sync. Hive, the library I am using to persist data on a device is handling that. Internaly Hive uses Android's shared preferences to store your data. As far as I know, the shared preference file created by an app is not removed during the removal/uninstall of the app. Thats why the settings are still available, even after deleting the app.
from mobileraker.
But still it seems weird that I can delete my app data, don't see the printer in the app, uninstall and reinstall it and then get the printer back, even though the last state the app was in was without a printer...
from mobileraker.
But still it seems weird that I can delete my app data, don't see the printer in the app, uninstall and reinstall it and then get the printer back, even though the last state the app was in was without a printer...
Well, that's definitely weird.
I have no explanation for that behaviour. However, I can guarantee you that no cloud sync is involved in mobileraker at the moment, you can always check the source code here.
from mobileraker.
I can confirm, that the latest beta does fix the printer settings and the dashboard for me. Now only my cameras mjpg stream is does not load, but that could be user error.
from mobileraker.
I can also confirm that the dashboard and printer settings are fixed. For me, even the webcam is working, but the thumbnails in the file explorer are still not loading.
from mobileraker.
I can confirm, that the latest beta does fix the printer settings and the dashboard for me. Now only my cameras mjpg stream is does not load, but that could be user error.
Regarding the MJPEG stream, ensure that the correct address is set!
The cam is working on my side.
from mobileraker.
I can also confirm that the dashboard and printer settings are fixed. For me, even the webcam is working, but the thumbnails in the file explorer are still not loading.
I always receive the thumbnail images directly from moonraker. This is also working fine on my devices and also on the emulator.
from mobileraker.
@Leithian, @padok did you guys manage to resolve your issues?
So far I did not receive feedback regarding your issues.
from mobileraker.
Yes, for me the problem is solved, I switched my camera proxy to snapshot mode and my camera is also working again.
Thanks a lot for your help!
from mobileraker.
Related Issues (20)
- Macro Categories [FR] HOT 5
- Support klipper-for-cnc with XYZABCE Axes HOT 3
- Webcam panel shown despite no webcam configured HOT 2
- Add custom headers to Webcam URLs? HOT 4
- Alarm on layer number reached HOT 3
- Octoeverywhere Live Link and Gadget Control
- Notification override's older notification HOT 1
- app crashes on first attempt, loads normally 2nd attempt HOT 12
- Neopixel (Possibly all) LED color wheel bugged beyond use HOT 7
- App notifications wrong language HOT 6
- Screw tilt adjust popup on opening app HOT 4
- Reverse Proxy Camera Error HOT 5
- Spoolman Rounding HOT 4
- 2.6.17-460 - main screen broken? HOT 1
- Crashes on startup on macOS HOT 1
- LED lights control support HOT 1
- Android app can't connect to pinter after a few days HOT 8
- Remove WS-Address field & reference
- Ercf / happy hare Support HOT 4
- Opened app and All printers and Settings were gone HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from mobileraker.