AC Battery CT clamp on Eddi not added about ha-myenergi

[G6EJD]

I’ve noticed that HA does not update the integration, so I use the HA file manager and upload the files separately to the custom folder, it works that way. I also manually install the Python files.

[godfreym29]

G6EJD

I've manually downloaded the folders & files and copied them to the custom_components folder and restarted etc.
But no change, i still do not have the battery showing under the Eddi.

I believe that the const.py file may not have been updated with the new version number.

[G6EJD]

Johan afaik doesn’t have an Eddi so it could be there is no CT detection included yet, I haven’t checked the code yet to see if that’s so.
Works ok for a Harvi, but maybe not Zappi too.

[godfreym29]

G6EJD

The intergration is picking up:

• sensor.myenergi_eddi_xxxx_power_ct_internal_load - "ectt1": "Internal Load" - which is "ectp1" on the eddi - the internal CT clamp which measures what is diverted to the immersion
• sensor.myenergi_eddi_xxxx_power_ct_grid - "ectt2": "Grid" - which is "ectp2" on the eddi - import/export to the grid

but not "ectt3": "AC Battery" - "ectp3"

[sparks1372]

These will hopefully resolve the issue - #309 and CJNE/pymyenergi#4

[CJNE]

Thanks @sparks1372, will include this in the next release. @G6EJD is correct, I don't have an Eddi so I missed this :)