Please add airspeed and current about arducam-osd

[GoogleCodeExporter]

regarding airspeed; a configurable minimum (stall warning) would be great.

Original comment by [email protected] on 11 Feb 2012 at 12:01

[GoogleCodeExporter]

Original comment by [email protected] on 11 Feb 2012 at 12:58

• Added labels: Type-Enhancement
• Removed labels: Type-Defect

[GoogleCodeExporter]

and: consumed capacity (mAh)

Original comment by [email protected] on 11 Feb 2012 at 1:10

[GoogleCodeExporter]

Please see this video:  http://youtu.be/gD1JAz4oEDI
Having airspeed and/or analog variometer would be very *very* useful.

Original comment by [email protected] on 21 Feb 2012 at 11:44

[GoogleCodeExporter]

yes: actual current and consumed capacity mAh was genious

i've use ardupilotmega with oilpan and attopilot current sensor.

Original comment by [email protected] on 9 Mar 2012 at 1:09

[GoogleCodeExporter]

Yes please add current display and consumed capacity display in mah

Original comment by [email protected] on 14 Mar 2012 at 3:53

[GoogleCodeExporter]

Airspeed and current will seal the deal for me too.

Toggling icon visibility with values would be nice; don't need all those 
symbols if you know what values you put where anyway!

Original comment by [email protected] on 18 Mar 2012 at 6:02

[GoogleCodeExporter]

As minimum, one aditional battery (motor) voltage could be very usefull. (maybe 
it can get and display info from APM2 analog sensors, so there will be huge 
possibilities, like rssi, current, more battery voltages etc)

Original comment by [email protected] on 27 Mar 2012 at 12:20

[GoogleCodeExporter]

Airspeed is important for me also. :)

Original comment by [email protected] on 1 Apr 2012 at 8:42

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I have found a solvation for airspeed. Thanks to community! :)

http://www.diydrones.com/forum/topics/change-unit-measurement-of-speed?id=705844
%3ATopic%3A835655&page=1#comments

Original comment by [email protected] on 22 Apr 2012 at 9:27

[GoogleCodeExporter]

Just putted together a firmware that has airspeed.

Here is it:

The source also:

Did not test it yet

Original comment by [email protected] on 14 Jul 2012 at 10:16

Attachments:

• Minimosd_AS_KMH_RA_BP_G_Firmwarecofigtool.zip
• Source_0.5.zip

[GoogleCodeExporter]

This outlines adding current to the firmware.

http://diydrones.com/forum/topics/adding-extra-functions-to-minimosd?commentId=7
05844%3AComment%3A927276&xg_source=activity

Original comment by [email protected] on 26 Jul 2012 at 5:02

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Original comment by [email protected] on 1 Oct 2012 at 11:00

• Changed state: Done