error about ddt4all

[KarelSvo]

RED in your photo because your exact ECU software version is not listed in the ECU file.

[adicretu97]

Aha, thx And what can i do? Looking for another database with more ecu's? Lun, 2 apr. 2018, 11:28 KarelSvo <[email protected]> a scris:

…

RED in your photo because your exact ECU software version is not listed in the ECU file. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#48 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AkObUnOuE4B6Jm5tVXvGAoD5RfpWXtJ_ks5tkeFGgaJpZM4TC8MV> .

[KarelSvo]

Your ECUs are yes in the database.
No one hundred percent match with the software list is no problem, just a beauty bug.
If you want the beauty, you must supplement your read software version in the ECU file.
Your DDT4all version is also not up to date. Change this to avoid software problems.

[cedricp]

Yes, it looks like your version is very old, try updating it and retry. Some bugs have been fixed for KWP2000 protocol handling.
Red lines with no relevant ecufile found mean that there's no XML file to support the found ECU.
Those with no perfect match mean that XML file is found but not with the exact soft version.

[KarelSvo]

I would say that all relevant ECUs are available in the database.
Only the maintenance of the data status of the software versions is not particularly good.

I had to complete the software version of two ECUs of my vehicle, otherwise these will not be found during automatic scanning.

I would not overrate this data comparison.

[cedricp]

Interested to get that patch, would you share it ?

[KarelSvo]

I have only opened the ECU xml in the text editor and updated with my actual ECU data.

AutoIdent DiagVersion=" " Supplier=" " Soft=" " Version=" "

To know which ECUs are installed, you can use the CLIP database and with to scan PyRen or PyClip.
Apparently the data status is more up-to-date there, because that is a diagnostic tool.
However, Pyren does not support older renault vehicles because you need to identified them directly on the ECU or in the parts catalog.

DDT is more a tool of vehicle development.
Therein is a maintenance of the software versions not so important.

[adicretu97]

I will try tomorrow with kkl interface 409.1 with usb Thx for answers Lun, 2 apr. 2018, 15:26 Cedric PAILLE <[email protected]> a scris:

…

Interested to get that patch, would you share it ? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#48 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AkObUpodctIzzSKNFos8sFPDX1aqO0sHks5tkhjngaJpZM4TC8MV> .

[cedricp]

Not sure it'll work with kkl interface 409.1, it's not ELM327 compatible...
@KarelSvo : Ok, I understand

[adicretu97]

I need elm with a specific chipset code no? Lun, 2 apr. 2018, 15:46 Cedric PAILLE <[email protected]> a scris:

…

Not sure it'll work with *kkl interface 409.1*, it's not ELM327 compatible... @KarelSvo <https://github.com/KarelSvo> : Ok, I understand — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#48 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AkObUpDvaX_TAdI-w1ak8KryqSdwSY-Pks5tkh29gaJpZM4TC8MV> .