firmware question about cyclone-pcb-factory

[CarlosGS]

Hi, there have been too many changes to have an easy way to compare them. In fact, latest version of Marlin already implements Z probing so it is much more convenient to use it :)
The software folder in the Cyclone repository is basically obsolete.

[ve3sjk]

thanks, i can see now that it just needs the latest version of marlin code, i have that compiled now and have moved on to first movement on the y-axis. i printed the yopera variation. I am trying to figure out the steps per in the software. I used M8 threaded rod, what is the correct gear ratio for each axis. I believe i need that to make the proper calculation.

[CarlosGS]

This is my recent modification of the latest Marlin: https://github.com/carlosgs/Marlin Probe command does not work, though, but it works with CNC Gcode Controller

For the gear calculations:
#define Cyclone_XY_Gear_Ratio 21.0/21.0 // Number of tooth (motor/rod)
#define Cyclone_Z_Gear_Ratio 8.0/15.0 // Number of tooth (motor/rod)
#define DEFAULT_AXIS_STEPS_PER_UNIT {3200.0/(Cyclone_XY_Gear_Ratio_1.25),3200.0/(Cyclone_XY_Gear_Ratio_1.25),3200.0/(Cyclone_Z_Gear_Ratio*1.25),800} // steps per unit for Cyclone

Regards,
Carlos