canca87 Goto Github PK

8bit_powerlevel_converter

Adds 18% to an 8-bit value preseted to the IO ports

asc-to-mat-converter

Converts ASC files (Wyko ASCII Data File) to a MAT file (struct variable)

bracciov2

Updated library for Tinkerkit Braccio arm

cn5x

cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.

cve-single-axis-control

Controls a FESTO axis using a CMMO type controller. The control is via the CVE interface detailed in the FESTO controller manual.

fibrelasercontroller

Teensy microcontrol for a fibre laser using a DB25 interface

grbl_analog

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

hardwareteensypulsedlaserdriver

Hardware timers for pulsing the laser

ic-wkm_teensy_driver

illumination_ring

TLC5955 based arduino (teensy3.6) illumination ring

mmm-p2000-python-connect

Raspberry P2000

monte_carlo_pi

Monte Carlo simulation of Pi

pc-conky

This is a complete conky config for my PC. This config is written according to the requirements of version 1.10.

plano-convexfocaldistancecalculator

Calculated the focal distance of a plano-convex lens in air.

q_scpi_base

Q - braccio arm with accelerometers for improved precision. SCPI command compliant

quoba_pi_cam

Raspberry pi camera with sensors and GPS

rfid522-door-unlock

Arduino RC522 RFID Access Control

scpi-parser

Open Source SCPI device library

scpi_base

Base from which Teensy/Arduino SCPI projects can be made

teensypulsedlaserdriver

Basic IO hardware to control the on/off duty of a laser

ueyecamerainterface

Opens a uEye camera from a gigE interface, The user can easily observe the intensity profile of the light on two indepenent axis.

usb_host_shield_2.0

Revision 2.0 of USB Host Library for Arduino.

valvecontroler-forteensy

uses the serial port information to control 8 valves attached to the teensy microcontroller