Comments (8)
Can you give some detail about your setup?
What MQTT broker? How is MQTT set up? Are you using Home Assistant?
from meross.
mqtt configured using mosquitto as per example provided (Minimal unauthenticated), except port which I use 1883, on Home Assistant Core deployment.
However the issue right now is that not even able to see the device joining Wifi Network. setup command is the following:
./meross setup --gateway 10.10.10.1 --wifi-ssid RoDaniH --wifi-pass ******** --mqtt mqtts://192.168.68.100:1883
┌────────────────────┬────────────────────────────────────────────────────────────────────
│Device │mss210 us mt7682 (hardware:2.0.0 firmware:2.2.2)
├────────────────────┼────────────────────────────────────────────────────────────────────
│UUID │19011804581223251h0434298f1a4b07
├────────────────────┼────────────────────────────────────────────────────────────────────
│Mac address │34:29:8f:1a:4b:07
├────────────────────┼────────────────────────────────────────────────────────────────────
│IP address │10.10.10.1
├────────────────────┼────────────────────────────────────────────────────────────────────
│Current MQTT broker │192.168.68.100:1883
├────────────────────┼────────────────────────────────────────────────────────────────────
│Credentials │User: 34:29:8f:1a:4b:07
│ │Password: -----------------------------------------
├────────────────────┼────────────────────────────────────────────────────────────────────
│MQTT topics │Publishes to: /appliance/19011804581223251h0434298f1a4b07/publish
│ │Subscribes to: /appliance/19011804581223251h0434298f1a4b07/subscribe
└────────────────────┴────────────────────────────────────────────────────────────────────
Device will reboot...
Nothing on mosquitto:
sh-3.2$ mosquitto_sub -h 192.168.68.100 -p 1883 -t "/appliance/19011804581223251h0434298f1a4b07/publish" --cafile /Users/user/ca-meross.crt
from meross.
Meross devices can only use port 8883
from meross.
You are certainly right. I have re run setup and reconfigure mqtt and now mss210 is showing up on mosquitto and home assistant. Couple of questions though:
- Is it expected that MS210 led keeps blinking green instead of solid green when working on cloud?
- Also, HA only works for turning the swith off as when I do so, entity becomes unresponsive on home assistant until manually turned on
Thanks
from meross.
Sorry, I don't have any experience with the MSS210. However, I expect it's still flashing as it's unable to connect to something or isn't receiving some kind of configuration complete signal. It would be with seeing what messages it sends to your broker.
What integration are you using to control the device? It's possible they have not implemented the device status in a way that works for this device.
from meross.
I´m working with Meross LAN on Home Assistant. I guess I´ll have to follow this investigation up with them.
Thanks a lot for your help
from meross.
They are great at Meross LAN, they'll get you set up in no time.
from meross.
@DanyGijon FYI it could be because the device need to connect to an external NTP server:
pool.ntp.org
0.amazon.pool.ntp.org
time1.aliyun.com
0.europe.pool.ntp.org
0.north-america.pool.ntp.org
0.south-america.pool.ntp.org
from meross.
Related Issues (20)
- Does this support MSS310 Hardware Version 6 ? HOT 24
- Unable to setup device MSS210 HOT 15
- Setting MQTT and Wifi for MSS210 HOT 3
- No time synchronisation with 5.1.1 firmware HOT 2
- Upgraded firmware/incorrect key HOT 2
- [question] hass mqtt connection HOT 1
- Plug keeps blinking green forever HOT 3
- mss110 power switch with firmware 7.3.19 requires user and key HOT 4
- [QUESTION] What exactly is --gateway? HOT 2
- Error Unable to connect to device - TypeError: Cannot read properties of undefined (reading 'system') HOT 16
- Setup does not work for newer MSS310 HOT 8
- Device mss425e won't connect to AP, falls back to pairing mode HOT 16
- Updated firmware on mss310 us rtl8710cf (hardware:6.0.0 firmware:6.3.22) causes red light HOT 1
- Issues with ssl after upgrading from Debian 11 to Debian 12 HOT 2
- Cant connect MSS710 HOT 4
- NTP queries from Meross Plugs HOT 1
- TypeError: program.version is not a function HOT 1
- Device Key? HOT 1
- Unable to setup MSS310 HOT 2
- mss210 contents to wifi and mqtt but doesn't push changes to mqtt [un rtl8710cf (hardware:6.0.0 firmware:6.2.3) ] HOT 7
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from meross.