Comments (10)
When you run Install.exe
, r77 is installed and persisted. The next time you reboot your computer, it's still running. That's why you don't see the hidden file.
When you run Uninstall.exe
, r77 is gracefully detached from all running processes, and everything including the $77config
is deleted.
The $77config
key is only created when you install r77, not when you inject single processes in the Test Console. Also keep in mind that in order to edit this key, you may need to detach r77 from RegEdit.exe
.
If you like to read more about the exact functionality and how exactly to configure r77, I suggest taking a look into the documentation. It does into detail about how to use r77 and also into deep technical detail in the later chapters.
from r77-rootkit.
thanx for response but
yes, before writing to you, I looked at the documentation but as I am a great beginner, I do not understand much, sorry.
You have not answered me about the installation of your work .
Do I have to go through visual studio 2019 to clone the project or not at all? should I create a folder has the root + other folder in c system32 etc? hiidenfile.txt and hiddenapp.exe
or is it visual 2019 that creates All folders can be?
from r77-rootkit.
I am not the developer of this code, but can you try to tell us what you are trying to achieve?
If I understand you correctly, if you are not going to change anything in code, you dont need visual studio, you can download it from his website (https://bytecode77.com/r77-rootkit), password: bytecode77
And when you execute the Install.exe, basically everything on your computer that starts with $77 will be hidden. But you can use TestConsole to detach r77 from an specific application, so it will be visible for that application (like regedit, or file explorer).
So if you want to hide a folder or an application, the name has to start with $77
from r77-rootkit.
Like @uncidal said, you don't have to compile r77 yourself.
Just make sure to read Section 5 - Integration best practices. Because despite the fact that Install.exe
is really the only file you need - you still need to do some precautions when deploying it.
For example:
- Don't drop
Install.exe
to disk. This advice is not r77-specific, but it's generally bad to drop malicious files to the disk as they will get detected. It took a lot of work to make r77 fileless, but executing the Installer using RunPE is your part. - Use DLL unhooking in your process that RunPE's the installer
Of course, r77 will run fine if you just copy Install.exe
to the disk and execute it. However, it may get deleted by AV.
from r77-rootkit.
I am not the developer of this code, but can you try to tell us what you are trying to achieve?
If I understand you correctly, if you are not going to change anything in code, you dont need visual studio, you can download it from his website (https://bytecode77.com/r77-rootkit), password: bytecode77
And when you execute the Install.exe, basically everything on your computer that starts with $77 will be hidden. But you can use TestConsole to detach r77 from an specific application, so it will be visible for that application (like regedit, or file explorer).
So if you want to hide a folder or an application, the name has to start with $77
ok thanx for help ;)
no, I didn't load or change the code.
I understood that renaming a file with $77 ex $77tolls.exe ,
it would hide by running the exe .
personally I tested with TestConsole and it worked.
a question for console test , I have to do injected + hide correct ?
from r77-rootkit.
Like @uncidal said, you don't have to compile r77 yourself.
Just make sure to read Section 5 - Integration best practices. Because despite the fact that
Install.exe
is really the only file you need - you still need to do some precautions when deploying it.For example:
- Don't drop
Install.exe
to disk. This advice is not r77-specific, but it's generally bad to drop malicious files to the disk as they will get detected. It took a lot of work to make r77 fileless, but executing the Installer using RunPE is your part.- Use DLL unhooking in your process that RunPE's the installer
Of course, r77 will run fine if you just copy
Install.exe
to the disk and execute it. However, it may get deleted by AV.
ok I place it not on c: but or ?
I'm on a virtualbox vm"
you said
" It took a lot of work to make r77 fileless, but running the installer using RunPE is your part. Install.exe" RunPE? what is it ?
Use DLL unhooking in your process as RunPE is the installer I'll see for this program. with DLL unhooking, what do I do?
Thank you
from r77-rootkit.
Its a little hard to understand what you mean.
Can you try to tell us what you want to achieve? What is your end goal?
from r77-rootkit.
@MATOM0809 If you are a beginner, then you may be unaware of the techniques that are used, and what techniques you should / shouldn't use in your project.
To put it easy: Just run Install.exe
once, and you're set.
from r77-rootkit.
C’est un peu difficile de comprendre ce que vous voulez dire.
Pouvez-vous essayer de nous dire ce que vous voulez réaliser? Quel est votre objectif final ?
yes I know with translate google, the translation is not the right one of the times.
I just want to hide a program that uses a bot
from r77-rootkit.
@MATOM0809 Si vous êtes un débutant, alors vous n’êtes peut-être pas au courant des techniques utilisées et des techniques que vous devriez / ne devriez pas utiliser dans votre projet.
Pour le dire facilement: Il suffit de courir une fois, et vous êtes prêt.
Install.exe
ok thanx i tested
from r77-rootkit.
Related Issues (20)
- Compilation Error - File Not Found HOT 1
- hide icons from task bar HOT 4
- Rust ShellCode/Install.exe HOT 1
- Hide CPU Usage Not Fully Work HOT 24
- help me step by step to install a rootkit in my project? HOT 1
- $77 How can a non-interactive SYSTEM permission process use ShellExecuteW so that its child processes can be interactive HOT 2
- How to start executable files hidden by r77rookit? HOT 7
- Removal tool HOT 1
- resources HOT 7
- How to exclude specific processes from installation? HOT 2
- How to use shellcode? HOT 7
- how to change perfix $77 to my own keyword HOT 11
- Teaching lessons HOT 5
- Contact information HOT 1
- "MSB3073" Error HOT 4
- r77 rookit injects into PROCESS_CREATION_MITIGATION_POLICY_BLOCK_NON_MICROSOFT_BINARIES_ALWAYS_ON process
- Adding a .exe to startup HOT 6
- Help HOT 4
- ControlPipe using Powershell HOT 3
- Help Needed - Happy to pay consulting fees HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from r77-rootkit.