Flow meter for fuel measurement about sbus2-telemetry

[BrushlessPower]

Hello Trunet,

i never used a flow-sensor, but it should work without problems

You have to use a sensor which is available in your 10J (and supported by this library).
You could just use a Tempsensor (Temp125) to display l/min -> but you cant change that it's displayed as °C
or you could use the Current Sensor: Voltage (V) for Tank Volume, Current(A) for actual flow and Capacity (mAh) for drained Fuel .... but the Unit's will be wrong.

http://www.vspeak-modell.de/en/flow-meter
they used your Sensor and Telemetry Temp Sensors for Fuel in % and flow in ml/min

[trunet]

great... thank you very much. I will close as this was more like a question (not the best use for github issues).