PCB in release section uses wrong/non-existing parts about charybdis-pmw-3360-sensor-pcb

[bstiq]

Hello,

1/ I've had no issue ordering the PCBs on JLC, and had multiple reports of it working well for others. So the 0603 parts will work fine.
I used whichever parts I found best, standard or not. The PCBs still come out at around 4-5 eur per unit if you order 10 of them or so iirc.

2/ This happens frequently with JLC, they will correct it. Just make sure the orientation is correct on the parts - they tend to place the level shifter rotated wrong.

I'm sorry you find the files useless, feel free to push a PR with the fixes you proposed !
Meanwhile, I will close this issue.

Regards,

[Nobodi99]

Thanks for fixing the file.
Before your new upload it was 1.6pre1.zip and that had the smaller parts and was therefore not usable.
The 1.6e.zip has bigger pads and is correct for the 0603 parts size.
Would have been nice of you to at least say that you fixed it instead of just saying it worked for you...

[bstiq]

Hey,

The other files were in testing, which I confirmed working. Just forgot to update the release.
This is also a kind reminder that this is an open source project that is provided as is, and I have no obligation to it or you.
Acting entitled is not helpful.

Regards,