Comments (9)
I think I need to first run the start_grabbing service. However, I get the following error in the pylon_camera_node termianal:
[ERROR] [1615808346.473366169]: An exception while setting target image encoding to 'mono8' occurred: Node is not writable
[ERROR] [1615808346.473378920]: Error while start grabbing
from pylon-ros-camera.
@emanef13 Can you check if your camera supports Mono8 pixel format at all? That is, some USB color cameras do not support monochrome pixel formats at all. In this case, you should try using Bayer8 instead.
from pylon-ros-camera.
Hi, thanks for your reply!
Yes the camera can support mono8 (Mono8 is not recognizable though, when I pass it as a parameter).
[ INFO] [1615808915.912177845]: Cam supports the following [GenAPI|ROS] image encodings: ['Mono8'|'mono8'] ['Mono12'|'mono16'] ['Mono12p'|'NO_ROS_EQUIVALENT']
from pylon-ros-camera.
@emanef13 Okay, could you post the exact camera model name here, please?
from pylon-ros-camera.
Camera model: acA1920-155um
from pylon-ros-camera.
@emanef13 ok, thanks. Please make sure the camera is not running already. Actually, after StartGrabbing() is called, all critical payload parameters like Pixel Format, Width, Height etc. are turning from RW to RO.
from pylon-ros-camera.
@m-binev Hello, what do you mean by not running the camera? If I do not run the camrea_node the services are not available. Could you please specify that? Thanks for the help!
from pylon-ros-camera.
@emanef13 Hi, the forkflow for setting up a camera and grabbing images is as follows: 1) you first configure relevant parameters, e.g., width, height, pixel format, etc. 2) Then allocate ressources, e.g., buffer memory. 3) Then start image acquisition and grab images into the alocated buffers, which are reused for grabbing after releasing the memory.
In pylon, 2) and 3) are pretty simplified and encapsulated in high level functions like StartGrabbing(). At point 2) though, all critical parameters like width, height, pixel format are locked and trurn from RW to RO. So, before setting e.g. pixel format, you have to make sure that StartGrabbing() has not been called, or that you call StopGrabbing().
On a side note: have you checked the following AppNotes: https://www.baslerweb.com/fp-1591878203/media/downloads/documents/application_notes/AW00149103000_Interfacing_Basler_Cameras_with_ROS~1.pdf
from pylon-ros-camera.
Thanks for your insights @m-binev! I was not able to use the start_grabbing service, however I made my own script that subscribes to the topic where raw images are published, and grabs an image by img = rospy.wait_for_message(relative_topic, Image, 2) .Then I am able to do my post-proccesing.
from pylon-ros-camera.
Related Issues (20)
- Question about function PylonInitialize HOT 5
- pylon_camera fps not reaching set frame_rate HOT 8
- Camera Config help for short range imaging HOT 2
- Connection multiple cameras ROS2 and publish images HOT 2
- ACE cameras PTP synchronization (acA_1920-40gc) HOT 2
- No available camera. Keep waiting and trying... HOT 2
- Synchronization error with image timestamp
- [Humble] Don't waste time on blocking image data readout HOT 4
- How to extract the different intensities from the polar camera rostopic /image_raw HOT 3
- Merge PR168_change_setLineMode_behavior into Humble HOT 1
- Cannot connect and get images from Blaze over a router HOT 3
- BUG: Image Encoding Parameter is not read as expected HOT 1
- Blaze depth map encoding HOT 7
- Cannot access ethernet camera from within docker container HOT 1
- Not able to change pins Line2 and Line3 mode with camera Ace2 HOT 3
- GenAPI|ROS image_encodings: [BayerGR8'|NO_ROS_EQUIVALENT']
- Error connecting to Basler A2a2600-20gcPRO REV: 12 through default.yaml HOT 1
- BUG: ROS 1 (master branch) package.xml version is not updated HOT 2
- BUG: Large memory leak for every Blaze image HOT 4
- changes not reflected when launching camera with reverse_x and reverse_y set to true HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from pylon-ros-camera.