Capturing video from second camera on balenaFin about balena-cam

[mbalamat]

Hi @Hegazi before running balena-cam can you check if there is a /dev/video1 device?

[Hegazi]

Running 'ls /dev/' I get video0, video1, video10, video11, video12.

[mbalamat]

@Hegazi sorry for the late reply for a quicker response we reply very quickly in our forums. Can you try running vcgencmd get_camera to see if the cameras are recognised. After that can you try to run raspistill -cs 1 -o image1.jpg to see if the camera that is connected to the second CSI port works and takes a picture?

[Hegazi]

@mbalamat I have posted on the forum right here:

Running vcgencmd get_camera I get:

supported=2 detected=2

Running raspistill -cs 1 -o image1.jpg I get:

mmal: mmal_vc_component_enable: failed to enable component: ENOSPC
mmal: camera component couldn't be enabled
mmal: main: Failed to create camera component
mmal: Failed to run camera app. Please check for firmware updates

[jellyfish-bot]

[rahul-thakoor] This issue has attached support thread https://jel.ly.fish/#/9cab8786-b291-45bf-8d8c-90c53c9ead9d

[rahul-thakoor]

Have you also changed this line ?

[mbalamat]

@Hegazi since we are discussing this on the forums I'll close this. Feel free to re-open it if you need to.