avandalen Goto Github PK

adafruit-gfx-library

Adafruit GFX graphics core library, this is the 'core' class that all our other graphics libraries derive from

albert

albert-arduino-library

avdweb_analogreadfast

avdweb_dac16

Cheap 16 bit DAC AD5662 for the Arduino

avdweb_freqperiodcounter

Smart library with comprehensive functions for counting (multiple) frequencies and period-times. For Arduino Uno and Zero.

avdweb_heartbeat

avdweb_pedelec_legalisation_device

avdweb_samdpwmdac

Fast PWM-DAC library for the SAM15x15 and Arduino Zero

avdweb_samdtimer

SAMD21 Timer library for the SAM15x15 and Arduino Zero

avdweb_scope

Debug oscilloscope library for the Arduino

avdweb_switch

Switch library with longPress and doubleClick

bontrager-ion-200-rt-holder

Freecad 3d CAD model for the Bontrager Ion 200 RT holder

changing-arduino-ide-theme-colors

Changing the Arduino IDE tab and comment font colors

connectorless-zigzag-1x6-mini-isp-connector

An Arduino ISP connector is used, among others, for burning a bootloader and for programming ATtiny chips. When the ISP connector is only used once, it would be more convenient not to use a connector. Therefore, I created the connectorless 1x6 mini ISP connector and the mini 1x6 ISP adapter. By the zigzag positions of the PCB holes, the male ISP connector pins press against the holes and make electrical contact and so, no PCB connector is needed.

cr6842s-flyback-converter

cubesat_eps

daytime-running-light-for-ebikes

diy-e-bike-thumb-throttle-switch

eagle-library-addressable-led-rings

Eagle library for easily create addressable LED rings NeoPixel WS2812B-2020

eepromwearlevel

Arduino EEPROMWearLevel reduces EEPROM wear by writing a new value to an other EEPROM location.

electronic-larynx

fast-pwm-dac-for-the-arduino

Create a faster DAC than analogWrite() with the FastPWMdac library

fdti-updi-connector

Typically, debugging via the serial monitor and burning the bootloader requires 2 connectors: FTDI For debugging and uploading the sketch UPDI For burning the boot loader (like the ICSP connector for the Atmega328 and others) These connectors, however, take up a lot of space on the pcb, especially with respect to the fact that the ATtiny devices, such as the ATtiny3217, are very small. That is why I have designed a new combined FTDI / UPDI connector, which take less space on the pcb.

hammond-1591xxsgy-frontpanel

ili9341-overwrite-text

The Adafruit_ILI9341 library cannot print new text over other text correctly. The old text is not erased first as it should. With this library extension we can overwrite text and numbers correctly.

lightweight-tsdz2

This project is about building a lightweight mid drive motor with the parts from the TSDZ2.

ltc2499-ltc2493-24bit-adc

This library can be used for: LTC2493: 2/4 channel 24bit ADC LTC2499: 8/16 channel 24bit ADC This library contains the ADC part of the combined library Ard2499 which contains the libraries for the LTC2499 24bit ADC and the 24AA025E48 EEPROM See the 16-Channel 24-Bit ADC Data Acquisition Shield for Arduino from Iowa Scaled Engineering: * https://www.iascaled.com/store/Arduino/ArduinoDataAcquisition/ARD- * GitHub https://github.com/IowaScaledEngineering/ard-ltc2499

ltc2944-library-battery-gas-gauge

max17263-arduino-library