SSH/SDK Mode only working after flash about meta-smartwatch

[eLtMosen]

This is solved at least as of nightlies 2022-03-11.
SDK mode now works reliably like on all other watches.

[eLtMosen]

tl:dr; Is this a USB2 (not working) vs USB3 (working) issue?

Log from 1.0 fastboot-image and 2021-12-12-24 user-image

• booting the watch with
• Letting the device settle for 30sec
• plugging in USB and wait for PC to notify about SDK Network being available
• connecting to ssh [email protected], going su and executing journalctl --no-pager > journal-fastboot1.log
  journal-fastboot1.log

Log from both nightly images flashed:

• Initial boot after flash with usb still plugged in from flash

• skip tutorial

• Try to connect via ssh but result is ssh [email protected] ssh: connect to host 192.168.2.15 port 22: Network is unreachable

• Remove usb cable and plug it back in (14:56)

• successfull connect via ssh and going su

• doing journalctl --no-pager > journal-fastboot2.log
  journal-fastboot2.log

• Then removing and plugging back the USB does not work and i get Network is unreachable even after waiting 90sec.

• Rebooting with usb cable attached during boot results in not working SDK-Mode after boot

• Plugging USB out and in -> then brings back SDK Mode to working state (~15:03).
  journal-fastboot3.log

New realisation, the SDK-Mode start up depends on wether i choose USB2 or USB3 port:

• All above depended on using a powered USB2 port on my laptop.
• When switching to USB3 port all works as expected.
  Log from several failed attempts using USB2 and successfull ssh and journalctl-log creation using USB3 connection:
  journal-fastboot4.log