GsmWebClient example for GSM shield v2 does not work since v.1.5.7 about gsm

[agdl]

From @SerxioSierra on November 14, 2015 13:30

As I have explained in one thread in Arduino.org

http://labs.arduino.org/tiki-view_forum_thread.php?comments_parentId=988&topics_offset=2

the origin of the mentioned problem was that I had been using a compatible board DCcEle DCcduino UNO and not the original Arduino UNO R3 board. I tested with the original board and finally the GsmWebClient example worked fine with Arduino IDE 1.6.6 from Arduino.cc.

However as I said in that thread there might be something different in the source code that causes the problem mentioned with GsmWebClient example and the 1.6.6 version from Arduino.cc. However I tested that this problem did not appear using the 1.5.6-r2 version, that example worked fine with the DCcduino compatible board and the GSM Shield 2, therefore something in the code changed between the versions 1.5.6-r2 and 1.6.6 from Arduindo.cc that made the example did not work properly with that DCcduino compatible board as I described.

It would be interesting if you could check the GSM libraries or other code to solve this incompatibility for those users that own compatible boards as DCcduino and GSM Shield 2 and want to use the Arduino IDE from Arduino.cc.

Many thanks for your assistance.
Best Regards