Selecting profiles require a least one profile to be given as an option about archinstall

[Torxed]

@kpcyrd That is an interesting error, it means that the profile selector could not locate any profiles. Did you configure the network properly on the machine? Or you booted straight into a pre-prepared ISO?

If this was indeed the issue, I should most definitely create a "startup check" that notifies users about pre-requisites prior to sending them to the select-option stage.

[kpcyrd]

The network is working correctly, I've used the regular arch iso and installed archinstall with pip install archinstall. :)

[Torxed]

Awesome, thank you for the feedback. Will test it out and see what the issue might be!

[Torxed]

Found the issue, it's simply a confusion in the code where cwd is during execution.
Trying to isolate which commit caused this issue as it has been working before. Just to be sure the fix doesn't interrupt any logic I've introduced since then : )

Problem: https://github.com/Torxed/archinstall/blob/master/archinstall/lib/profiles.py#L24

[Torxed]

I think that resolves it, works in the test environment at least.
If the issue still exists, I'd be happy to re-open and continue digging : )

(pypi upload will commence shortly, with a new version release with some other fixes)