non riesco ad installare alcuna Gui Luci/Transmission/Aria2 Su DGA4132 AGTHP_2.4.0 about tch-nginx-gui

[faddanicolo]

Ci sono stati problemi ad installare custom GUI già dalla versione 2.3.4 (#1160 (comment)) quindi aggiornando a una versione ancora più recente penso che possano solo peggiorare... Ti consiglio di tornare indietro alla versione 2.2.1 se vuoi utilizzare tutte le funzioni della GUI.

[FrancYescO]

Avete ancora problemi con l'ultima versione?
datemi l'output completo di questi due comandi eseguiti da SSH
/usr/share/transformer/scripts/appInstallRemoveUtility.sh remove luci
/usr/share/transformer/scripts/appInstallRemoveUtility.sh install luci

[Nico202009]

c'è speranza che venga fixato e magari funzioni anche in queste versioni?

[faddanicolo]

Il bug ormai è presente da un bel po', penso più di un anno, quindi a meno che qualcuno riesca a trovare la causa e farla presente ai contributori o ansuel credo non ci sia molta speranza.

[faddanicolo]

Purtroppo sono tornato a homeware 18 un paio di giorni fa a causa di alcuni problemi, ho visto che ansuel ha pushato molti commit questi giorni quindi sarei disposto a ritornare a homeware 19 per fare delle prove, sarebbe meglio passare a fw 2.3.x o direttamente 2.4.0?

[FrancYescO]

io le prove le sto facendo su AGTEF_2.3.4, non credo cambi molto sul 2.4.0

il problema principalmente è con i feeds che si va ad inserire, ho chiesto anche a macoers di far pulizia dei pacchetti di luci per cercare di sistemare il problema, ma comunque ora ad installare da interfaccia, almeno altro che non sia luci non mi da problemi

di sicuro tutti questi problemi non ci sono con i 18.x

[faddanicolo]

Dato che per adesso l'unico modem che posseggo è quello che dovrò utilizzare per testing dovrò aspettare al fine settimana per ritornare a homeware 19... Spero che qualcun altro possa provare la nuova versione prima

[Nico202009]

ho provato ad installare luci con questo comando da ssh /usr/share/transformer/scripts/appInstallRemoveUtility.sh install luci effettivamente si installa ma quando ci entro mi esce questo

[sanzoghenzo]

Ciao, ho avuto lo stesso problema con il mio DGA4132, software AGTHP_2.3.3.

Tramite UI il processo sembrava restare appeso allo scaricamento di luci-lib-nixio, ma pareva più questione di output troncato nella finestra (l'url non era completo);
Ho risolto eseguendo l'installer via ssh, e riesco ad accedere alla pagina di luci senza problemi

Non credo serva, ma qui di seguito il mio output. Notare che l'uninstaller non ha trovato nulla da rimuovere (avevo fatto refresh della pagina sulla UI, probabilmente interrompendo il processo?)

root@modemtim:~#  /usr/share/transformer/scripts/appInstallRemoveUtility.sh remove luci
No packages removed.
root@modemtim:~#  /usr/share/transformer/scripts/appInstallRemoveUtility.sh install luci
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/base/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_base
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_luci
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_telephony
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/target/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_core
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/base/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_base_macoers
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages_macoers
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_luci_macoers
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing_macoers
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/chaos_calmer_telephony_macoers
No packages removed.
Installing libuci-lua (2019-05-17-f199b961-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/base/libuci-lua_2019-05-17-f199b961-1_arm_cortex-a9_neon.ipk
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Installing luci (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci_git-20.155.55668-a972bdb-1_all.ipk
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (librt and librt) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (libpthread and libpthread) providing same name marked HOLD or PREFER. Using latest.
Installing uhttpd (2018-11-28-cdfc902a-3) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/base/uhttpd_2018-11-28-cdfc902a-3_arm_cortex-a9_neon.ipk
Installing luci-lib-nixio (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-lib-nixio_git-20.155.55668-a972bdb-1_arm_cortex-a9_neon.ipk
Installing luci-lib-ip (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-lib-ip_git-20.155.55668-a972bdb-1_arm_cortex-a9_neon.ipk
Installing rpcd (2018-11-28-3aa81d0d-2) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/base/rpcd_2018-11-28-3aa81d0d-2_arm_cortex-a9_neon.ipk
Installing luci-lib-jsonc (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-lib-jsonc_git-20.155.55668-a972bdb-1_arm_cortex-a9_neon.ipk
Installing liblucihttp (2019-07-05-a34a17d5-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/liblucihttp_2019-07-05-a34a17d5-1_arm_cortex-a9_neon.ipk
Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_arm_cortex-a9_neon.ipk
Installing luci-base (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-base_git-20.155.55668-a972bdb-1_arm_cortex-a9_neon.ipk
Installing luci-mod-admin-full (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-mod-admin-full_git-20.155.55668-a972bdb-1_arm_cortex-a9_neon.ipk
Installing luci-theme-bootstrap (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-theme-bootstrap_git-20.155.55668-a972bdb-1_all.ipk
Installing luci-app-firewall (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-app-firewall_git-20.155.55668-a972bdb-1_all.ipk
Installing luci-proto-ppp (git-20.155.55668-a972bdb-1) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/luci-proto-ppp_git-20.155.55668-a972bdb-1_all.ipk
Installing libiwinfo (2018-07-31-65b8333f-1) to root...
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/target/packages/libiwinfo_2018-07-31-65b8333f-1_arm_cortex-a9_neon.ipk
Installing libiwinfo-lua (2018-07-31-65b8333f-1) to root...
Downloading https://raw.githubusercontent.com/Ansuel/GUI_ipk/kernel-4.1/target/packages/libiwinfo-lua_2018-07-31-65b8333f-1_arm_cortex-a9_neon.ipk
Installing rpcd-mod-rrdns (20170710) to root...
Downloading https://repository.macoers.com/homeware/18/brcm63xx-tch/VANTW/luci/rpcd-mod-rrdns_20170710_arm_cortex-a9_neon.ipk
Package rpcd (2018-11-28-3aa81d0d-2) installed in root is up to date.
Configuring libuci-lua.
Configuring rpcd.
Configuring luci-lib-ip.
Configuring libiwinfo.
Configuring libiwinfo-lua.
Configuring luci-theme-bootstrap.
Configuring luci-app-firewall.
Configuring luci-proto-ppp.
Configuring luci-lib-nixio.
Configuring luci-lib-jsonc.
Configuring liblucihttp.
Configuring liblucihttp-lua.
Configuring luci-base.
Configuring luci-mod-admin-full.
Configuring uhttpd.
4+0 records in
4+0 records out
Configuring rpcd-mod-rrdns.
Configuring luci.
4+0 records in
4+0 records out

[Nico202009]

A me mi dice error no related RPC reply ho fatto la tua stessa procedura con output uguale ma sono su agthp 2.4.0 mi consigli di resettare il modem?

[FrancYescO]

@Nico202009 hai provato già a disinstallare e reinstallare?

[Nico202009]

@FrancYescO già fatto una decina di volte

[Nico202009]

@FrancYescO posso provare a resettare il modem

[Nico202009]

resetto il modem poi ti dico

[FrancYescO]

Aspetta.

Prova ad eseguire dopo il remove

sed -i '/^Package: uhttpd/,/^$/d' /usr/lib/opkg/status

[Nico202009]

provo

[Nico202009]

non va penso di resettare il modem

[FrancYescO]

Scrivimi i log completi sia di remove che install

[FrancYescO]

Ho sbagliato a darti il comando comunque era

sed -i '/^Package: rpcd/,/^$/d' /usr/lib/opkg/status

[Nico202009]

Grazie mille lo stesso ormai ho già resettato il modem poi ti dico se funziona

[FrancYescO]

Installa da terminale e passami il log di install

Se riesci controlla anche se è tutto ok dopo un remove e reinstall da gui, cerca di postarmi tutti i log.

[Nico202009]

funziona ecco il log