Auto bed leveling enhancement about advi3pp

[iz3man]

i may add some how-to maybe:
playing with the serial console and changing M851 up and down, then saving, doing it again etc takes some time. sure this is something you may do once, and then forget.
but if you tinker a lot and change your printbed, your nozzle etc you have to do it all again.
so a menu like the "move" menu where you can do the following:
i may some how to maybe:
playing with the serial console and changing M851 up and down, then saving, doing it again etc takes some time. sure this is something you may do once, and then forget.
but if you tinker a lot and change your printbed, your nozzle etc you have to do it all again.
so a menu like the "move" menu where you can do the following:

.) move nozzle down to the bed (Z0)
.) then test with a sheet of paper (or your eyes, or whatever)
.) have a button for 1mm up/down, 0.1mm up/down, 0.05mm up/down
.) have a button for save (M500)

displaying M851 during that i an added value.

that's it :)
thank you

[andrivet]

No more relevant with version 4.0