Old ipaddress shown in integration overview about ha-tplink-deco

[richardwonka]

+1 affected, but not minor, since this happens, the integration fails

[amosyuen]

I made some changes in https://github.com/amosyuen/ha-tplink-deco/releases/tag/v2.2.5 that should update the title properly. I'm not entirely sure why the config gets messed up, but I added an extra defensive check. Please try updating and you might need to remove then re-add the integration.

[richardwonka]

+1 affected, but not minor, since this happens, the integration fails

When I enter the IP address and access data that worked so far, the integration says:

Retrying setup: Cannot connect to host none:80 ssl:default [Name does not resolve]

[amosyuen]

Please see if https://github.com/amosyuen/ha-tplink-deco/releases/tag/v2.2.3 helps with this issue

[richardwonka]

Just re-added the Integration and it’s looking good.

[richardwonka]

Integration is failing again. Showing the old default IP address, it appears the fix was short-lived.

[grigorye]

I'm not sure what if it's the same issue, but in my case the integration was working for a month or so, but today I discovered that it's broken since the IP address was reset to 192.168.0.1. When I "reconfigure" and enter the correct address/password, it says that it succeeded, however nothing changes on the devices page - it still shows the error and if I "reconfigure" again, it still shows "192.168.0.1" as the IP address/no password and etc.

Just in case, reloading the integration or restarting HA does not help.

[Waterchasd]

I was having the same error as grigorye was having. After I removed and reinstalled the integration, all is working now. Big thanks for the excellent work.