SiliconSoftware compatibility broken with MicroEnable V about pylablib

[AlexShkarin]

Thanks for letting me know! It will be fixed in the next release.

[matpelb]

Great! My own solution is quite plain and not very smart nor elegant so I doubt there is any value in me providing more details about it, but feel free to ask of course

[Jasondio]

Hi, I recently had a problem using this software, and my frame grabber is also MicroEnable V. After opening the detect program, it shows that the camera is skipped and the camera is not opened by other software, my camera model is PhotonFocus MV-D1024E. the solution you mentioned I also tried to use, but No problem solved. I look forward to your answer, your answer will be of great help to me, thank you. @matpelb

The following is the message printed by the detect program

Searching for PhotonFocus cameras (might take several minutes)
Checking potential PFRemote interfaces Silicon Software GmbH/board0_port0, Silicon Software GmbH/board0_port1

Checking interface Silicon Software GmbH/board0_port0 ... discovered camera MV1-D1024E-160
Found 1 PhotonFocus camera
Checking PhotonFocus camera idx=0
Port board0_port0, vendor Silicon Software GmbH, model MV1-D1024E-160
Skipping the camera

[matpelb]

Hi @Jasondio
If the camera is not detected/opened by both the PFremote interface and MicroDisplay the problem is most probably not related to pylablib.
Is that what you mean by "the camera is not opened by other software" ?