Comments (7)
I've been getting "No response" messages too.
In my case, it seems like the "No Response" is only happening when the system is armed. It will work fine when disarmed, with the alarm accessory correctly showing the disarmed state (and the individual sensors all correctly updating when faulted).
If I use the Home app to arm the system to "Home", it will correctly arm the system to STAY and initially show the updated state, but eventually the Alarm System accessory icon will show "No response." The Homebridge log doesn't indicate any issue and continues to display messages received from the Alarm system. I can't use the Home app to disarm the system, but as soon as I disarm it (e.g., using a physical keypad or the Web App), the Alarm System accessory becomes responsive again in HomeKit.
Is that similar to what you are seeing?
I'm running Homebridge on HOOBS (latest version 3.2.3) with version 3.1.5 of this Alarmdecoder platform plugin.
This is the kind of message I'm seeing in the logs when the Alarm Homekit accessory is non-responsive:
5/5/2020, 9:10:14 PM [Alarm System] {"last_message_received":"[00100001000000003A--],008,[f70600ff1008008c08020000000000],"ARMED STAY "","panel_alarming":false,"panel_armed":false,"panel_armed_stay":true,"panel_battery_trouble":false,"panel_bypassed":{},"panel_chime":false,"panel_entry_delay_off":false,"panel_exit":false,"panel_fire_detected":false,"panel_panicked":false,"panel_perimeter_only":false,"panel_powered":true,"panel_ready":false,"panel_relay_status":[],"panel_type":"ADEMCO","panel_zones_faulted":[]}
And here's what it shows when it is disarmed and responsive:
5/5/2020, 9:03:07 PM [Alarm System] {"last_message_received":"[10000001000000003A--],008,[f70600ff1008001c08020000000000],"DISARMED Ready to Arm "","panel_alarming":false,"panel_armed":false,"panel_armed_stay":false,"panel_battery_trouble":false,"panel_bypassed":{},"panel_chime":false,"panel_entry_delay_off":false,"panel_exit":false,"panel_fire_detected":false,"panel_panicked":false,"panel_perimeter_only":false,"panel_powered":true,"panel_ready":true,"panel_relay_status":[],"panel_type":"ADEMCO","panel_zones_faulted":[]}
I'll keep testing and see if I can figure anything else out, but I'm not sure how best to go about debugging this.
from homebridge-alarmdecoder-platform.
from homebridge-alarmdecoder-platform.
I haven't seen that issue. I have struggled from time-to-time with my network seemingly losing the ability to resolve mDNS names. I just moved everything to static DNS entries and that seemed to have sorted that problem (that and a router reboot every once-in-awhile).
I wonder with all the versioning whether there's something in the accessories or persist cache that's causing the problem. Could you spin up a container with a new homebridge and see if that helps? (or nuke accessories/persist from homebridge)
from homebridge-alarmdecoder-platform.
from homebridge-alarmdecoder-platform.
This thread has some possible things to try and resolve this issue. I'll update when it occurs again and am able to test some of them. Particularly, the idea that the Pi processors are overloaded sounds particularly interesting, given that I haven't found any pattern to when it is offline and when it isn't. homebridge/homebridge#1801
from homebridge-alarmdecoder-platform.
I just tried wiping the persist and accessories cache on my home bridge installation and re-adding just this plugin and it still has the same behavior. And I have static IP addresses and ports explicitly specified in both directions between the home bridge plugin and the Alarmdecoder web app, so I don't think it's an mDNS issue (unless I'm misunderstanding).
Anyway, it sounds like I've having a different issue than what was specified above since mine is perfectly reproducible and happens whenever the alarm system is armed to Home / Stay. I'll try it out on a new home bridge installation. If I can't figure out what is going on, I'll start a separate issue.
from homebridge-alarmdecoder-platform.
Closing this, as it is the same as #17
from homebridge-alarmdecoder-platform.
Related Issues (20)
- Fix for issue 5 broke sending for ademco/honeywell boards HOT 2
- Port Same? HOT 1
- Bad Request',) line 1144. HOT 1
- Bad Request inside of Webapp with Webhook setup as outlined HOT 4
- Crash when adding to HomeKit on fresh homebridge installation HOT 7
- "No Response" from Alarm System accessory when system is armed HOT 17
- Notification issue HOT 2
- Duplicate Zones after resyncing panel HOT 1
- I'm missing something.... HOT 2
- adding custom buttons? HOT 7
- useSwitches for any arbitrary commands HOT 1
- Can’t Arm “Night” HOT 8
- Plugin causing system to crash HOT 2
- Parse Error: Expected HTTP/ HOT 1
- Errors detected with interlogix integration HOT 1
- Excessive logging in Homebridge HOT 3
- Repository Release is showing 2.x HOT 1
- Plug-in is slowing down Homebridge
- Npm and Git repos are out of sync HOT 6
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from homebridge-alarmdecoder-platform.