Enhancement: Ability to use a USB or Bluetooth Headset for audio modes i.e. SSB about sbitx

[g0kao]

just some initial testing, this is not scientific, it is not meant to be as it is a practical approach that a typical user might do:
No modifications, as delivered SBITX tests:

1. Audio inputs and outputs currently set to audio-injector-pi-soundcard
   So without any changes I power up the unit and start the sbitx application, audio is heard from the radio speaker. Note that audio level needs to be set to at least 74 for a comfortable minimum listening level, Audio almost disappears at a level of 50 making it unusable for normal listening down near this level. Note that on FT8 the audio level can be reduced to 0(zero) without affecting the inbuilt FT8 decoding capability suggesting that digital modes take their audio input from a different point in the rx audio circuitry.
   Now connect USB headset (Jabra Evolve 30 II in my case), connected while radio app running, Speaker audio set to 63 listening to the FT8 tones on 20m, nothing heard in the USB headset. Adjust both H/S and sbit volume controls, no change. Headset connected to a USB 3 port(blue port)
2. Audio Output changed to the USB headset
   While sbitx app running, changed audio settings(speaker in menu bar) to USB headset for output, just testing output to headset at this stage. No apparent change in audio. Stop radio app and check audio output settings and restart sbitx app doing this as there is a detection routine within the app to detect audio devices no change detected.
   Reboot the radio without making any further changes, audio now being heard at a reduced volume level in the headset, Headset volume control set to maximum. Audio heard louder on the radio speaker at the same time. Headset connected to physical port on side of radio normal volume similar to speaker volume.
   The audio in the USB headset is ok but could do with being a bit louder to cope with a noisy operating environment. It is an improvement over the fitted speaker though.
   Stopped the sbitx app, opened a terminal window and ran this command to my USB device identified using the aplay -l command:
   speaker-test -Dplughw:CARD=II,DEV=0 -c 1 -t wav
   Nearly deafened me!! I had not changed the volume control on my headset before playing the test sound.
   Early indication from this is that the audio volume output from the radio app needs investigating as the quality and volume of the audio is not great for a radio to be listened to in non digital modes.

Moved USB H/S to USB 2 port(Black Port) and restarted sbitx app, no noticeable difference as expected but needed to test as user could connect headset to any available port.

Played the speaker test to the radio sound card to compare:
speaker-test -Dplughw:CARD=audioinjectorpi,DEV=0 -c 1 -t wav
very noticeable difference in volume and quality of sound from the speaker compared to the sound injected from the radio, not expecting BBC quality from the radio but needs to be improved from where it is in terms of quality and volume.

This bit needs handling as a separate issue from the desire to use a different device for input and output audio.

[drexjj]

sBitx Toolbox now includes USB Headset functionality with the current sBitx software on both 32 bit and 64 bit OS. https://github.com/drexjj/sBITX-toolbox and https://github.com/drexjj/sBITX-toolbox64