retrieve parameters/packages from original bootloader image about aml_s905_uboot

[3F]

As a big side note for future, I recommend to use RAM directly without affecting ROM if you don't want to recover your corrupted bootloader from device for each trying of course.

write bl2_file 0xd9000000        // bl2  
write uboot_tpl_file 0x200c000   // tpl to ddr  
write usbbl2runpara_file 0xd900c000  // for booting tpl from 0x200c000 

0xd9000000  <<< ddr run
0xd900c000  << +c000
0x200c000   <<  0x2000000 (u-boot map) + c000

Actual addresses may be different for your platform, therefore you need to check it from manifest from any firmware image to your device after unpacking it, for example, via AmlImagePack tool:

AmlImagePack -d flashable.img ./dir

Also note, BL2 may prevent corruption of bootloader when you're trying via official flasher. Because flasher (usb burning tool or how it was named, I don't remember) starts like ~ bootloader -> then with BL2 will try to execute directly from RAM and it will abort anything if they have any problem, or it will finally commit changes to ROM.

Seems this is what I'm talking about:

with USB_Burning_Tool , the process stops at 1% with error :
[0x10103005]Romcode/initialize DDR/download data/reading image failed

To the question:

Is there any way to retrieve the above parameters/packages from the original bootloader ( dumped with dd command ) ?

Yes, of course, https://github.com/3F/aml_s905_uboot#arm-trusted-firmware

before sequence [010064AA] ~ u-boot.bin.usb.bl2 (BL2)
  Second part, starting with `010064AA` is UBOOT.USB ~ u-boot.bin.usb.tpl  

But looks like your attached bootloader is encrypted. I'm not sure (I don't see @AMLрї sign) and you're talking about s905d that I did not inspect as I already said (s905, s905x, s905d, are not the same).

Anyway, there are something different with your case before my 010064AA:

0018A690  07 0B 08 0D 12 12 2A 08 01 00 00 00 00 00 24 24  ......*.......$$
0018A6A0  00 00 00 00 00 44 A4 00 00 80 [ 01 00 64 AA ] 00 00  .....D¤..Ђ..dЄ..
.........................................^ at 0x18A6AA

So you can't separate it manually as in my readme.

More probably, you need to decrypt this before. Try to ask on XDA for your s905d platform to be sure.

Rehashing the header can also help for your case. Here I mentioned about this.

try this:

aml_encrypt_gxb --bootsig --input bootloader.img --output u-boot_new.bin

btw, this should also prepare/extract separated bl2/tpl

u-boot_new.bin -- updated full image
u-boot_new.bin.usb.bl2 -- DDR.USB
u-boot_new.bin.usb.tpl  -- UBOOT.USB  

just try

However,

just to restore your device

If you only need to restore your device, I recommend Access mode for your emmc,

When u-boot/ddr is corrupted, we can try to switch memory controller into access mode

then just rewrite an working bootloader from any related firmware.

[NLTD2010]

Do you fix it ?